Pumps and Equipment

Universal automatic float switch for bilge pumps, compatible with 12V, 24V, and 32V systems (supports up to 14A). This heavy-duty float enables automatic control of higher-power pumps, ensuring reliable operation even on larger boats and yachts.

• Multi-voltage: Operates on 12V, 24V, or 32V – a flexible choice for various vessels.
• High amperage: Handles up to 14A current – suitable for higher-capacity pumps with strong output.
• Rugged build: Heavy-duty design with water-resistant housing and a reliable mechanism for long service life.
• Auto protection: Activates your pump as water rises and shuts it off as it recedes – prevents flooding without human intervention.

Automatic bilge pump float switch with an elongated slim profile (130 x 44 x 54 mm). Designed for installations in tight spaces, it reliably switches your pump on when water is present and off when it’s drained. An ideal solution for bilges with low clearance or crowded equipment.

• Slim profile: Only 44 mm wide – fits into narrow or shallow bilges where standard floats can’t.
• Automatic control: Monitors water level and operates the pump, protecting your boat from flooding without manual switching.
• Durability: Marine-grade plastic housing and a dependable mechanism that works in fresh or saltwater.
• Universal: Compatible with most 12V/24V bilge pumps (standard amp rating) – suitable for a wide range of boats and yachts.

High-water bilge alarm system – includes an audible buzzer (85 dB) and a float sensor. When water rises above normal levels, the float triggers a loud alarm to alert the crew of potential flooding. Designed for 12V systems (float switch handles up to 14A, allowing parallel pump control if needed).

• Loud 85 dB buzzer: Highly audible alarm that catches attention even in noisy conditions.
• Float sensor: Detects high water level and automatically activates the alarm when danger is present.
• 12V compatible: Runs on standard 12V DC; float switch can control pumps up to 14A (if required).
• Enhanced safety: Early warning of excessive bilge water – gives you time to react and save your boat from severe damage.

A powerful heavy-duty float switch for bilge pumps, compatible with 12V, 24V, and 32V systems and rated up to 20A. Built to control the most powerful pumps or very frequent use, this float ensures reliable automatic dewatering even in extreme conditions.

• Exceptionally robust: Tough construction, impact and corrosion resistant – made for heavy marine use.
• 20A capacity: High current rating to directly switch large pumps (2000+ GPH) without a relay.
• Multi-voltage: Supports 12V, 24V, and 32V systems – ideal for yachts, commercial boats, and work vessels.
• Automatic protection: Keeps bilge dry by activating high-capacity pumps when water is present and stopping when gone, preventing floods.

High-performance marine macerator pump designed to grind toilet waste and ensure reliable discharge. Self-priming impeller pump with stainless steel cutting blades, available in 12V or 24V versions. Ideal for marine toilets and holding tank installations on boats.

• Flow rate 44.1 L/min (≈700 GPH) for fast waste water pumping
• Twin stainless steel blade cutter for efficient maceration of solid waste
• Available in 12V (draws ~12A) or 24V (~6A) models to suit different onboard power systems
• Self-priming design handles waste from toilet or holding tank without clogging
• Durable build resists marine conditions; compact size allows flexible installation

Compact automatic water pressure pump (Europump 4) with ultra-low power consumption, ideal for supplying fresh water on board. Capable of serving up to 2 outlets (taps) with a built-in pressure switch set at 2.8 bar for automatic pressure regulation. The pump features thermal overload protection, can run dry briefly without damage, and has reverse polarity protection for wiring safety.

• Flow 3.8 L/min at 2.8 bar (40 PSI) – perfect for a sink and shower on a small boat or camper
• Very low current draw – only 2A at 12V (energy-efficient to conserve battery power)
• Integrated pressure switch (2.8 bar) – pump auto-starts/stops when a faucet is opened or closed
• Can feed 2 water outlets simultaneously (galley tap, shower, etc.) without pressure loss
• Safety features: thermal overload cutoff, ability to run dry without damage, and reverse-polarity protection

A practical replacement filter for Europump water pumps that provides reliable water filtration before the pump. Features a replaceable stainless steel mesh screen for durability and easy cleaning. Installs in seconds – snaps directly onto the pump inlet with no tools needed. Compatible with Osculati Europump models as well as Flojet and Jabsco pumps using similar quick-connect fittings.

• Replaceable filter element with stainless steel mesh – corrosion-resistant and reusable
• Quick snap-on attachment – connects directly to the pump intake, no extra hoses or clamps required
• Broad compatibility – fits Europump and similar pumps (Flojet, Jabsco) that use quick coupling systems
• Designed for quick connections – allows easy addition of quick-connect hose fittings to the pump system
• Enhances pump performance & longevity – traps debris and sediment to protect the pump diaphragm and valves from damage

Versatile manual bilge pump designed for both suction and discharge of water, ideal for emergency dewatering of boats. Available in three sizes – body lengths of 390 mm, 550 mm, or 1000 mm (all with Ø44 mm diameter). Includes a flexible ~95 cm discharge hose to direct water overboard. The ergonomic handle ensures comfortable operation, and the robust plastic construction withstands harsh marine conditions.

• Hand-operated bilge pump – requires no power, perfect for emergency onboard pumping
• Offered in 3 lengths: 390 mm (compact), 550 mm (standard), 1000 mm (extended) – to suit different bilge depths and boat sizes
• Ø44 mm pump cylinder – provides a good volume of water per stroke for quick dewatering
• Equipped with an ~95 cm outlet hose – makes it easy to direct pumped water overboard away from the boat
• Ergonomic grip handle – comfortable to use for efficient pumping; durable build for long-lasting service

A modern aerator pump for live bait or fish tanks, delivering high performance with low power use. 12V pump moving 51 L/min with up to 3 m head, CE certified (ISO 8846/8849) for safe operation in gasoline environments. The design allows 360° rotation of the pump unit and ports for flexible installation, and the motor is easily removable for cleaning. An integrated non-return check valve prevents water from flowing back into the system, enhancing reliability.

• 51 L/min flow, 3 m max head – provides strong water circulation in livewells and bait tanks
• Low ~3.5A current draw (12V) – energy-efficient for all-day use, minimal battery impact
• 360° adjustable body and hose ports – simplifies installation at any angle or orientation
• Easy maintenance – motor detaches quickly for cleaning; stainless steel shaft for longevity in saltwater
• Built-in check valve – prevents backflow or siphoning, keeping tank water level stable when pump is off