Oars, covers, and biminis

A heavy-duty bridge-style pad eye with reinforced design, made from AISI 316 stainless steel. This model features a thicker bar and sturdier construction, allowing it to handle higher loads compared to standard pad eyes. It’s the same convenient U-bracket shape with two mounting holes, but in a more robust form factor. Ideal for demanding applications on larger boats or structural projects where extra strength is required. Provides a reliable anchor point that is easy to install and extremely corrosion resistant.

• Material: AISI 316 stainless steel (extra thick build for enhanced strength)
• Design: Reinforced U-strap with two mounting holes (heavier gauge steel) – can withstand heavy pulls and sustained loads
• Use Cases: Recommended for larger yachts, industrial marine applications, or high-load tie-downs (e.g., securing jet skis on deck, attaching heavy blocks, overhead lifting points for equipment within rated capacity). Also excellent for architectural uses needing a stronger eye plate.

A chromed brass rowlock with base designed for secure and durable attachment of an oar to your boat. Ideal for small rowing and inflatable boats, this set provides a reliable pivot point for rowing:

• Material: Made of brass with a chrome-plated finish for maximum corrosion resistance in marine environments.
• Base Socket: Includes a brass base socket (52 mm depth) with two mounting holes for easy installation on the gunwale.
• Standard Size: 12 mm pin diameter – compatible with most boat oars and sockets.
• Reliability: Rugged construction withstands heavy rowing and is a superior alternative to plastic rowlocks that can break easily.
• Application: Perfect for wooden dinghies, fishing boats, and inflatables (2–4 m length) where a stable oar lock is required.

The telescopic roll-bar awning provides quick and effective shade over the boat’s cockpit, mounting directly to an existing roll bar/arch. With a stainless telescoping frame and waterproof canvas, this sunshade is perfect for relaxing at anchor or dock. Key features:

• Roll-bar mounted: Attaches universally to the boat’s roll bar or aft arch (requires appropriate clamps – available universally), with no permanent supports needed.
• Telescopic supports: AISI 316 stainless steel tubes that extend and retract, offering adjustable canopy reach (e.g. 1.2–1.7 m). This allows you to set the length of coverage as needed.
• Waterproof canvas: Durable white acrylic fabric, UV and moisture protected – shields from harsh sun and light rain. It stretches taut easily and keeps the cockpit cool.
• Easy setup: Deploys and secures with straps/ropes to cleats or rails. When stowing, the telescopic poles collapse and the fabric rolls up compactly.
• Available sizes: Comes in various sizes (e.g. 120x145, 130x170, 130x190 cm coverage) for small, medium, and large boats. Choose the size to match your roll-bar width and desired shade area.

Universal grey outboard engine head cover made of durable 300D polyester with PU coating. Protects your outboard’s cowling from rain, dirt, and UV damage during storage or transit. Available in 6 sizes to fit engines from 2–4 HP up to 100–150 HP (and ranges in between).

• Tough 300 Denier fabric – heavy-duty polyester with waterproof polyurethane backing; tear-resistant and long-lasting
• Elasticized hem/drawstring bottom – ensures a snug fit around the base of the outboard’s cowl; quick to put on and remove
• UV-resistant and waterproof – shields the motor cover from fading, cracking, and rust-causing moisture
• Sleek, contoured shape – suitable for outdoor storage or highway towing (stays secure when the elastic is properly tightened)
• Sizes available by HP range: 2–4 HP, 5–15 HP, 15–30 HP, 30–60 HP, 60–100 HP, 100–150 HP – simply select the one that matches your engine

Provide a stable support for your boat cover with this lightweight yet sturdy telescopic pole made of anodized aluminum. Its adjustable design lets you set the perfect height to prevent water from pooling on the cover, keeping your boat dry and the cover taut.

• Adjustable Height – available in two models with ranges 60–100 cm or 90–150 cm, accommodating the needs of different boats and cover sizes.
• Anodized Aluminum – lightweight, rustproof material that withstands saltwater and corrosion, ensuring a long service life.
• Wide Base & Cap Tip – a stable base prevents sliding on your boat floor; the top cap fits beneath the cover, distributing pressure evenly.
• Prevents Water Pockets – props your cover up like a tent, so rainwater and snow run off instead of pooling and sagging the cover.

Special clip for attaching a cover to an inflatable boat (RIB or dinghy) without the need for eyelets or adhesive patches. Made of durable grey PVC plastic, it clamps onto the boat’s tube and provides an anchor point for cover tie-downs.

• Quick to use: clips onto the inflatable tube and holds your cover in place, preventing it from sliding or blowing off
• Universal design – fits most tube diameters; won’t damage the PVC fabric of the boat (no sharp edges)
• Dual holes for threading rope or bungee – allows you to tension the cover tightly by running straps through the clip
• Constructed from marine-grade PVC – UV and saltwater resistant; grey color blends with common inflatable boat material
• Protects your boat: instead of drilling or gluing snaps, this clip provides a no-trace grip – keeps your cover secure while leaving the boat unmodified

Low-profile stainless deck base for bimini tops, featuring a fork and quick-release pin for instant canopy setup and takedown. Provides a strong fixed mounting point while allowing rapid removal of the frame.

• Construction: Cast AISI 316 stainless steel, polished to a mirror finish
• Quick release: Locking fork pin (tethered) that pulls out in seconds to remove the canopy
• Dimensions: Compact base (~90 x 39 mm) with two bolt holes – unobtrusive on your deck
• Versatility: Fork design accepts standard eye-end fittings for Ø22, Ø25, or Ø30 mm tubes
• Security: Sturdy fork holds the bimini securely even under way, and the pin’s design prevents accidental loss or release

A high-quality stainless steel end fitting for boat canopies (bimini tops) – an extended style for Ø22 mm or Ø25 mm tubes. This component replaces or upgrades standard plastic tips, providing a stronger connection and greater clearance when folding. Key features:

• AISI 316 stainless steel: Polished to a shine, fully corrosion-resistant – ensures reliability and a sleek look.
• Available in 2 sizes: Model 03831-1 fits Ø22 mm (7/8") tubing, and model 03831-2 fits Ø25 mm (1") tubing. Covers the most common bimini frame diameters.
• Extended design: A longer neck on the fitting allows a wider folding angle and extra clearance – prevents the canvas or frame from hitting the boat when lowered.
• Secure connection: Precisely drilled hole for the securing bolt/pin (standard ~6 mm) that provides a tight hinge joint with the deck hinge. No unwanted play or rattle in waves.
• Easy installation: Inserts into the tube end and locks with a screw or rivet. Ideal for replacing broken tips or upgrading from plastic to metal.

A set of lightweight aluminum oars, specially designed for inflatable boats and dinghies. These oars disassemble into 2 pieces for easy storage, combining durability and convenience. Key features:

• Lightweight Construction: Aluminum shaft Ø29 mm with reinforced plastic blades – resists corrosion and impact, yet remains light for effortless rowing.
• 2-Piece Design: Each oar consists of two sections that assemble quickly. When taken apart, each piece is short enough to fit in a carry bag or inside the boat itself.
• Ideal for Inflatables: The lengths (143 cm, 153 cm, 163 cm) are optimized for small inflatables, rubber dinghies, and rowable rafts. Also suitable as replacements for original equipment oars.
• Comfortable Grips: Ergonomic T-shaped handles on the top end provide a comfortable grip and control over the oar.
• Easy Transport: The entire set is compact and lightweight – perfect for camping, beach trips, or as spare gear, without taking up unnecessary space.

A stainless steel bimini deck hinge base with compact dimensions (50x22 mm) for side/vertical mounting. This bracket provides a secure attachment for canopy frames to a boat’s gunwale or console. Key features:

• AISI 316 stainless steel: Solid casting, corrosion-proof and mirror polished – ideal for marine use and long-term durability.
• Size 5 x 2.2 cm: Low-profile footprint fits in tight spaces. Two screw holes ensure sturdy installation on vertical or angled surfaces.
• Side-mount design: Intended for mounting on a vertical surface (e.g. inside boat hull, console side, or rail) where horizontal deck mounts won’t work.
• Hinged pin ~6 mm: Built-in hinge hole (approx. 6 mm diameter) accepts standard bimini eye ends. Allows angular movement – your bimini can pivot smoothly up and down.
• Universal compatibility: Fits all bimini tops and sunshades with standard metal end fittings. An excellent replacement for worn or corroded bases, providing improved strength and appearance.