Accessories

A set of two PVC straps for securing a wooden bench seat in an inflatable boat. These support belts glue to the inside of the tubes and loop over the seat, holding it firmly in position. They prevent the bench from sliding or lifting, while also protecting the tube from wear.

• Secure hold: Keeps the bench solidly wedged between the tubes – no wobbling or popping out in waves or when towing.
• Tough PVC material: Flexible yet strong straps (35 cm long, 12 cm wide) made of boat-grade PVC – bond seamlessly to the hull and resist tension and UV.
• Easy installation: Simply glue onto the tube with PVC adhesive; once installed they form a loop through which the bench edge slides.
• Universal fit: Suits standard wooden seats on small to mid-size inflatables – length provides broad contact area for less stress on fabric.
• Extend boat life: Prevents chafing of the fabric at the seat contact points and spreads the load of seated passengers more evenly.

A lightweight yet sturdy seat hook for attaching a wooden bench seat to the tubes of an inflatable boat. Easy to install and prevents the seat from sliding during navigation. Key Features:

• Durable Material: Made of UV-resistant, marine-grade plastic for long-lasting use in harsh conditions.
• Easy Installation: Mounts under the bench with three screws (two hooks required per seat, screws not included).
• Secure Grip: Provides a stable lock between the seat and boat tubes, eliminating wobble or movement underway.
• Universal Fit: Suitable for most small inflatable dinghies (3–3.3 m length) that use removable bench seats.

A heavy-duty stainless steel D-ring on a PVC backing patch, designed to be glued onto an inflatable boat. This 15 cm base D-ring provides a strong attachment point for towing, lifting, or securing gear. Key features:

• 15 cm PVC Base: Large circular base (15 cm diameter) offers a big bonding area for a secure adhesion to the boat’s tube.
• Stainless Ring: The D-ring (6 cm height, 7 mm thick) is made of 316 stainless steel – highly resistant to corrosion and able to handle heavy loads.
• High Load Use: Ideal for mounting on the stern or sides of the dinghy as a towing point, lifting eye, or tie-down for anchoring and mooring lines.
• Glue-On Installation: The PVC pad is compatible with standard inflatable boat PVC adhesives. It installs easily on PVC tubes and creates a watertight, strong bond when properly glued.

Get a secure mounting point for a sun canopy (bimini top) on your inflatable boat with this 22 mm base attachment. It provides a strong glue-on foundation on the tube for installing folding canopies and bimini systems. Highlights:

• Standard 22mm Size: Fits Ø22 mm poles and railing – the universal diameter for boat canopies and frames.
• Durable PVC Pad: Flexible base (~10 x 7 cm) made of reinforced PVC, which bonds tightly to the tube for maximum strength.
• Two Colors Available: Comes in grey or black versions to best match your boat’s color (choose the PVC-compatible option for your boat’s material).
• Easy Installation: Glue on with proper PVC adhesive; once cured, it withstands tension, wind forces, and the weight of the canopy.

A one-way drain valve (non-return plug) for inflatable boats with a Ø45 mm transom hole. It allows easy draining of water from the boat without letting it flow back in. Features:

• Two-Piece Design: Includes an inner and outer part that screw together through the transom, forming a tight, reliable seal.
• Auto Close Flap: Features a built-in rubber flapper that automatically closes to prevent backflow, allowing water to exit but not re-enter.
• Universal Ø45mm Fit: Fits standard drain openings of about 45 mm diameter (flange ~60 mm) – suitable for most RIBs and inflatables with a factory transom drain.
• Rugged Build: Made of durable plastic (ABS/nylon) with a brass pivot, resistant to impact, saltwater, and UV exposure for long service life.

A set of 4 glue-on patches with D-rings (stainless steel) to add extra tie-down points on your inflatable boat. Each patch is Ø10 cm, providing a strong hold for securing luggage, bow bags, or gear. Benefits:

• 4-Pack Set: Includes four individual D-ring patches – enough to strap down a bow bag or create multiple gear tie-down locations throughout your boat.
• Stainless Steel Rings: The D-rings (2 cm height, 4 mm thick) are made of stainless steel, corrosion-resistant for use in saltwater without rusting.
• Durable PVC Backing: Each ring is mounted on a 10 cm diameter PVC pad. These bases glue securely to PVC boat tubes, ensuring reliability under tension or load.
• Versatile Use: Perfect for adding extra lashing points – attach dry bags, dive gear, coolers, safety lines, etc., anywhere on your inflatable where you need them.

A replacement oarlock top part for inflatable boats (Ø35 mm diameter). This plastic holder with a brass pin securely locks the paddle to the boat’s socket, ensuring smooth rowing without the oar popping out. Key features:

• Standard Size: Ø35 mm cylindrical insert compatible with most inflatable boat oarlock bases (check your socket’s diameter for fit).
• Durable Material: Made of impact-resistant plastic that withstands flexing during rowing and won’t crack in cold conditions.
• Brass Locking Pin: Built-in brass pin/axle that won’t corrode – provides the hinge connection to the base and locks in place to prevent the oar from slipping out.
• Easy Installation: Fits into the existing oarlock socket on your boat and secures via the integrated pin or latch. Allows quick release when you need to remove or stow the oar.

A comfortable and rugged grab handle designed to be glued onto the tube of an inflatable boat. Measuring 290 x 95 mm, this large rubber handle provides a secure grip for carrying or holding on while underway. Features:

• Wide Footprint: The large base (29 x 9.5 cm) spreads the load and adheres strongly to the tube – it won’t peel off even under heavy lifting or pulling forces.
• Ergonomic Design: The handle is contoured for a comfortable hand grip, with smooth curves to fit your fingers. It allows a firm grasp even when wet or while wearing gloves.
• Hypalon/PVC Compatible: Made of a rubber material suitable for Hypalon (neoprene) boats. Available in black, dark grey, light grey, and mid grey – choose the color that matches your boat’s material (Hypalon or PVC).
• Multi-Purpose: Functions as a carrying handle for your boat, a safety grab point for passengers in rough water, and even as a lashing point (you can pass ropes under it to create an additional attachment).

A rubber base block for mounting a railing or grab handle onto an inflatable boat. This support securely attaches a 22 mm diameter rail tube to the tube via gluing. Key features:

• Durable Build: Made from a rubber-PVC blend, the block is flexible yet tough – it absorbs the stresses from the rail without detaching.
• Large Glue Footprint: The 100 x 120 mm base provides a broad bonding area on the boat, ensuring maximum adhesion strength. Block height: 60 mm for a firm support stance.
• Standard Ø22mm Hole: Designed for standard tubing with 22 mm outer diameter – suitable for grab bars, safety rails, or frame elements (e.g., a bow rail on a RIB).
• Enhances Safety: Enables installation of support handles or safety railings on inflatable boats of any size, giving passengers secure hand-hold points and extra stability when boarding or moving about.

A sturdy grey handle designed to be glued onto inflatable boats, providing a reliable grip for carrying and onboard safety.

• Made of durable, UV-resistant PVC for long-lasting strength
• Easily glues onto the boat’s tube with appropriate adhesive
• Provides a comfortable grip for carrying the boat or holding on during travel
• Universal grey color blends with most inflatable boat designs
• Base size 90x245 mm, height 47 mm – compact yet secure profile