Transom boards and transom pads

High-quality marine-grade stainless steel bracket for mounting an auxiliary outboard engine up to 12 HP (40 kg). It features a sturdy wooden mounting pad and a spring-loaded tilt mechanism, providing flexibility and easy engine retraction. An ideal solution for adding a kicker motor to small boats.

• Suitable for engines up to 12 HP / 40 kg (including modern 4-strokes)
• AISI 316 stainless steel construction – excellent corrosion resistance in marine environments
• Wooden mounting board (marine plywood with protective coating) for secure engine clamping
• Spring-assisted mechanism with multiple tilt/height positions for optimal engine depth and easy lifting

Sturdy fixed bracket for mounting an auxiliary outboard engine up to 15 HP (40 kg). Made of polished stainless steel with a highly durable PVC board for engine mounting. The special design provides a 140 mm offset/drop for better engine immersion and propeller submersion.

• For engines up to 15 HP / 40 kg (suitable for 15 HP 2-stroke or 10–15 HP 4-stroke engines)
• Mounting brackets crafted from polished AISI 316 stainless steel – maximum strength and a sleek look
• High-strength PVC mounting board (~175 x 178 mm size) – will not rot or deform from water exposure
• Fixed installation (no moving parts) – simple, reliable design with 140 mm setback for optimal prop depth in the water

Sturdy outboard engine trolley that simplifies the transport and storage of motors up to ~15 HP (40 kg). Equipped with wheels for easy maneuvering and a galvanized steel bracket to hold a fuel tank. A varnished beech wood board acts as a secure transom mount for the engine, allowing you to store the motor upright or perform maintenance conveniently on land.

• Suitable for outboard engines up to 40 kg (approximately 2–15 HP range)
• Robust steel frame (welded, painted/galvanized) resistant to heavy loads and corrosion
• Wheels: built-in wheels for easy rolling on docks, driveways, and workshops
• Fuel tank holder: galvanized bracket secures a fuel tank to the stand so you can move everything together

Replacement plastic transom plate for inflatable boats, designed to reinforce and protect the area where the outboard motor mounts. Trapezoidal shape with dimensions 192/265 x 175 mm (7 mm thick) fits the transoms of various models. UV and saltwater resistant, this plate prevents wear and distributes the clamping pressure of the motor evenly.

• Dimensions: top length 265 mm, bottom length 192 mm; height 175 mm; thickness 7 mm
• Material: durable technical PVC/plastic – will not corrode or rot
• Purpose: shields the boat’s transom and inflatable tubes from damage when mounting an engine
• Easy installation by gluing or bolting onto the boat’s wooden transom board

High-strength sliding bracket for a secondary outboard engine, made of AISI 316 stainless steel. Allows vertical movement of the motor (raise/lower ~70 cm) with multiple lockable positions and a safety strap. A wooden pad (25 x 20 cm) provides a stable mounting surface for engines up to 15 HP (60 kg). Ideal for boats that require adjustable auxiliary motor depth or need to retract the kicker when not in use.

• Capacity: engines up to 15 HP / 60 kg (suitable for 9.9–15 HP four-strokes)
• Material: 316 stainless steel (marine grade) – heavy-duty construction with robust slide rails and fasteners
• Sliding mechanism: Teflon rollers for smooth travel; automatic locks at each position
• Safety: includes a strong strap to secure the motor to the bracket, preventing vibration or bounce

Adjustable transom bracket for a secondary outboard made of stainless steel, available in two versions – standard (L=60.5 cm travel) and extended (L=90 cm travel). Suitable for engines up to 15 HP (60 kg). Equipped with automatic locks, a safety strap, and a wooden motor pad (13 x 20 cm). Allows choosing a shorter or longer vertical range depending on transom height.

• Two models: 02311 (60.5 cm slide travel for standard transoms) / 02311-90 (90 cm slide travel for tall transoms)
• Capacity: up to 15 HP / 60 kg – for both sizes
• Construction: 316 stainless steel rails and hardware; Teflon sliders for smooth movement
• Use case: for boats ~4–7 m; select model based on transom or platform height requirements

Durable wedge-shaped transom pad made of UV-resistant polypropylene, designed to reinforce and protect your boat’s transom when mounting an outboard engine. Its tapered shape (thickness 5–20 mm) provides a slight angle to optimize engine trim – especially useful for inflatable boats.

• Material: reinforced plastic, resistant to UV rays and marine conditions
• Design: non-slip textured surface for a secure engine clamp grip
• Dimensions: 440 x 360 mm; tapered thickness from 5 mm to 20 mm for angle correction
• Purpose: shields the transom from clamp pressure, distributes engine load, and dampens vibrations
• Application: ideal for RIBs and motorboats (~3–5 m) that require improved engine mounting angle and transom protection

Universal flat transom pad made of rigid UV-resistant polypropylene, designed to reinforce your transom and protect your boat when mounting a powerful outboard engine. With 6 mm thickness and large coverage, this pad distributes load evenly to prevent transom damage.

• Material: tough plastic (polypropylene) resistant to UV rays and corrosion
• Surface: embossed non-slip texture for a secure engine grip
• Dimensions: 440 x 360 mm; uniform 6 mm thickness for maximum support
• Protection: shields the transom from clamp pressure, scratches, and engine vibrations
• Application: suitable for medium and larger boats (~5–7 m) with higher horsepower outboards; available in white or black color

A small yet strong transom pad made of reinforced UV-resistant polypropylene, perfect for dinghies, inflatables, and small boats. With 7 mm thickness and 310 x 210 mm size, it provides effective protection for your transom against clamp pressure and vibration when mounting an outboard.

• Material: rigid, UV-stabilized polypropylene for reliable long-term use
• Surface: non-slip embossed finish for secure engine mounting
• Size: compact plate 310 x 210 mm, 7 mm thick – fits narrow transoms and small outboards
• Purpose: protects small transoms from distortion, distributes engine load, and reduces vibrations
• Colors: available in white and black versions to match your boat or engine color scheme