Marine paints, varnishes and preparations

• Two component polyester spray filler.

• recommended for priming fibregllas reinfoced hulls and other GFK surfaces.

• for filling small cracks and indentations before painting.

• finishing layer other polyester surfaces (putties, fillers, laminates).

Type: GRP laminates, wood, steel, aluminum

Place: Above waterline
Function: Large surfaces
Application: Spray gun
Thinning: YES – 0-10%
Pot file 20°C:    20 min
Hardening time 20°C:3 h
Color: light grey

• Polyurethane topcoat yacht paint especially recommended above the waterline.
• UV resistance and weathering.
• High Gloss.
• High mechanical strength.
• The viscosity of the paint and the amount of pigment provides high performance and high opacity.
• Spreading gives a perfect finish.
• Easy to mix and apply.
• Caution: do not drip onto vertical surfaces.
• Cans include components and room for mixing them.
• Special thinners matched to the type of application (brush/ roll or spray).
• First layer: epoxy primer Sea-Line, two-component paints.
• Additional colors by request: ecru, green, light blue, red.

Type: Laminates GRP, wood, steel, aluminum
Place: Above waterline
Function: High gloss top coat
Application: brush, roll, spray gun
Thinning: Roll/ brush thinner for PU or Spray thinner for PU
Theoretical coverage For 1l: 13-14 m2 for 75 μmWFT/ 40 μm DFT
Number of coats: 1 – 3
Pot life 20°C: 3 h
Time between layers without sanding: minimum 30 minutes

Epoxy filler lightweight 1:1 
recommended for large areas due to low own weight

PRODUCT DESCRIPTION :

• low weight and easy sanding allow to use light epoxy filler on large surfaces
• specific gravity of the product allows the apliacation of a thick layer without defects
• recommended for leveling large areas during boat construction and repair
• to repair large defects caused by osmosis
• repair of damage, cracks and scratches
• easy to prepare and apply
• cans contain such an amount of ingredients that there is place for mixing ingredients A and B (base and hardener)
• 50 minutes of pot life (in 20°C)
• hard to sanding (in 20°C)  after 20 hours
• 1:1 by volume
• 100:100 by weight
• First layer: epoxy primers Sea-Line, 2K paints
• Second layer: epoxy primers, 1K universal primer, polyurethane paint, antifoulings

Type: laminate, wood, stell, aluminium
Place: above and below waterline
Function: large areas
Weight: 1l = 700 g
Aplication: putty knife
Color: off white.

• Epoxy Filler with fiberglass 
• Epoxy Filler with Fiberglass is very durable and can be applied in very thick layers.
• Combination of lightweight component A and component B containing fiberglass allows for the apllication of thick layers without damaging the hull.
• Recommended for deep cavities and completion bonding in the process of repairing boats.
• Repair of deep defects from osmosis.
• Repairs damage, cracks and scratches.
• Easy to mix and apply.
• Cans include components and room for mixing them.
• Advantages include increased strength and bond.
• 50 minutes – pot life 20°C
• 16 hours – hard for sanding 20°C
• 2:1 – mixing by volume
• 100:50 – mixing by weight
• First layer: epoxy primer Sea-Line, two-component paints.
• Second layer: Epoxy Primers, 1K universal primer, colored Polyurethane Topcoat, anti-fouling paints.

Type: GRP laminates, wood, steel, aluminum
Place: Above and below waterline
Function: Deep damages, gluing
Application: Putty knife
Color: light grey.

• C3 SHAMPOO WITH WAX is a shampoo with wax for cleaning and protecting gelcoat and painted surfaces. High cleaning power and finish in gloss.
• Shake well before use.  Let a small amount dissolve in warm water and clean the vessel. After treatment, always rinse with fresh water. Polish with a dry, soft cloth to retrieve a high gloss shine.

Volume 250 ml

• Small repair caused by the action of osmosis.
• Healed minor damage, small cracks and scratches.
• Easy to mix and application.
• Cans contain a volume of components where is left place for mixing components.
• The advantage of this filler is convenient, relatively short curing time.
• 40 minutes – pot life 20°C
• 15 hours – hard for sanding 20°C
• 2:1 – mixing by volume
• 100:50 – mixing by weight
• The previous layer: epoxy primer Sea-Line, two-component paints.
• The next layer: epoxy Primers, 1K universal yachtprimer , antifouling paints.

BASIC INFORMATION:
Type of surface: GRP laminates, wood steel, aluminum
Place: Above and below waterline
Function: Fast repairs small scratches and damages
Color: light grey

APPLICATION METHOD:
Manually: putty knife

C2 CONCENTRATE CLEANER is very powerful water soluble and biodegradable cleaner for quick and efficient removal of oil, grease, scale, soot, nicotine etc. Great as a professional cleaner for fenders, tarpaulins, poles and aluminum ship components and for the removal of hydraulic oil .

Thin with water. For normal dirt add 1 part of C2 on 10 parts of water. For heavy dirt add 1 part C2 on 5 parts of water. Can be diluted with hot and cold water. Use cloth or soft brush. After treatment, always rinse with plenty of water.

Sea-Line® C2 CONCENTRATE CLEANER is a concentrated product for cleaning GPR off lingering contaminants. It is a very powerful biodegradable, water soluble cleaner for quick and efficient removal of contaminants from such surfaces as:
• GRP laminate
• varnished surfaces
• aluminium (masts, fittings)
• PCV (pontoons).
• rubber (reflectors, rubbing strakes, gaskets).
• textiles (tents, covers, tarpaulins).

The modern formula of Sea-Line® C2 Concentrate Cleaner combined with a possibility of diluting the product, depending on the degree of contamination, makes it ideal for removing:
• grease
• oils (also hydraulic ones),
• soot
• discolorations and damp patches caused by rainfalls
• other contaminants difficult to remove

Volume: 500 ml