Finishing coatings - finishes, varnishes

• Non skid powder is an additive for polyurethane topcoats.
• Non-slip powder = 20 grams, the amount for 750 ml of polyurethane or other surface topcoats.
• Add powder to the mixture, mix well and wait 15 minutes.
• Apply with a short-haired roller. During application, paint must be mixed often
• Dose for can 0,75l.

• 1 – component synthetic transparent clear coat.
• Recommended above waterline, exterior and interior.
• Recommended for wooden boats.
• Excellent flow, UV-stability and high gloss.
• Easy and universal in application process.
• Diluted version of impregnated wood – protects the wood by forming a layer of primer.
• Works as a high-gloss top coat without thinning.
• Paint does not change the color of the wood after application.
• Good flow gives a perfect finish.
• The previous layer: Sea-Line Universal Yachtprimer 1 – component or epoxy primers 2K

Type: wood
Place: Above waterline, interior
Function: High gloss
Application: brush, roll, spray gun
Thinning: Thinner for 1 – component primer, varnish, enamel
Theoretical coverage for 1l: 12-13 m2 for 80 μm WFT/ 40 μm DFT
Number of coats: 1 ÷ 3 – renewal old varnish; 1 ÷ 5 – new wood, creating new coat
Dry to the touch 20°C: 3 h
Dry to rain 20°C: 16 h
Fully woterprof: 24 h
Elapsed time before applying next coat:    min. 16 h
Color: transparent

Package: 0.750l.

• High-gloss clear polyurethane coat (varnish) recommended to protect wood and ensure a long-term, perfect appearance.
• Does not require primer.
• Diluted version of impregnated wood.
• Protects the wood by forming a layer of primer.
• Works as a high-gloss top coat without thinning.
• Paint does not change the color of the wood after application.
• UV resistant and weathering.
• High mechanical strength.
• Good flow gives a perfect finish.
• Easy to mix and apply.
• Caution: do not drip onto vertical surfaces.
• Cans contain components and room to mix them
• Special thinners matched to the type of application (brush or spray).
• First layer: epoxy primer Sea-Line, varnish, polyurethane Sea-Line.

Thinner - when Polyurethane Clear Coat is used as a primer, it is necessary to use a thinner for PU. When Polyurethane Clear Coat is used as a topcoat, it is not recommended to use a thinner.

Type: Wood, laminates GRP
Place: Below and above waterline
Function: – Top coat (without thinner); – Primer (with thinner)
Application: brush, roll, spray gun
Thinning: Yes - Roll/brush thinner or Spray thinner
Theoretical coverage For 1l: 12÷13 m2 for 80 μmWFT/ 39 μm DFT
Number of coats: 2 – 4
Pot life 20°C: 3 h
Time between layers without sanding: min 20 m.
Color: None (clear).

• Polyurethane topcoat yacht paint especially recommended above the waterline.
• UV resistance and weathering.
• High Gloss.
• High mechanical strength.
• The viscosity of the paint and the amount of pigment provides high performance and high opacity.
• Spreading gives a perfect finish.
• Easy to mix and apply.
• Caution: do not drip onto vertical surfaces.
• Cans include components and room for mixing them.
• Special thinners matched to the type of application (brush/ roll or spray).
• First layer: epoxy primer Sea-Line, two-component paints.
• Additional colors by request: ecru, green, light blue, red.

Type: Laminates GRP, wood, steel, aluminum
Place: Above waterline
Function: High gloss top coat
Application: brush, roll, spray gun
Thinning: Roll/ brush thinner for PU or Spray thinner for PU
Theoretical coverage For 1l: 13-14 m2 for 75 μmWFT/ 40 μm DFT
Number of coats: 1 – 3
Pot life 20°C: 3 h
Time between layers without sanding: minimum 30 minutes