Deck equipment and accessories

A T-shaped AISI 316 stainless steel fitting for railing tubes with Ø25 mm diameter. This cast inox connector allows a perpendicular join of three rail tubes (two horizontal Ø25 mm rails and one vertical stanchion). The cast construction provides exceptional strength and corrosion resistance – perfect for marine handrails and guardrails.

• Tube Diameter: Ø25 mm
• Material: Cast stainless steel (AISI 316) – polished finish, withstands saltwater and UV exposure
• Installation: Secured with stainless set screws or pins (stainless fixing screws included); easy to install or replace existing joint
• Connection Angle: 90° T-branch – designed for joining horizontal railing sections with a vertical post
• Use Cases: Bow and stern railings, flybridge or deck guardrails, bimini top frames, and any tubing system on boats and yachts using 25 mm diameter rails

Durable stainless steel safety hasp latch ideal for securing lockers, hatches, and cabinets on your boat. Designed to be used with a padlock for added security, it provides corrosion-resistant protection in marine environments.

• AISI 304 stainless steel construction for excellent rust resistance
• Compact size (72 x 24 mm) perfect for small doors and compartments
• Includes padlock eye for secure locking (padlock fits through the hasp)
• Easy to install with pre-drilled mounting holes for screws or bolts
• Suitable for use on boats, as well as outdoor cabinets, sheds, or gates

Sturdy nickel-plated brass cam lock designed for cabinets, panels, and lockers on boats. Features a 90° turn locking mechanism with an anti-vibration design, operated by a removable triangular nylon key, ensuring secure closure even in rough conditions.

• Solid brass construction with nickel plating for corrosion resistance
• 20 mm cylinder length fits standard marine panel or door thickness
• 90° cam lock mechanism secures doors firmly in place
• Supplied with a durable triangular nylon key that reduces rattle and noise during motion
• Ideal for glove boxes, electrical control panels, cabinet doors, and other compartments that need reliable locking on board

Round-base stainless steel fitting for 90° railing posts (vertical). Made from polished AISI 316 stainless steel for superior corrosion resistance. Allows secure mounting of Ø22 mm or Ø25 mm rail tubes to a deck at a right angle.

Key Features:

• Solid Construction: One-piece stainless steel base with round flange (approx. 66–69 mm diameter) for maximum strength and stability.
• Angle & Size: Holds rail tubes at 90° (vertical). Compatible with Ø22 mm or Ø25 mm railing tubes – choose the size that matches your rail for a snug fit.
• Premium Material: AISI 316 stainless steel, polished to a high shine. Completely rust-resistant, even in coastal and offshore environments.
• Easy Installation: Three pre-drilled holes for mounting screws/bolts. The symmetric round shape allows easy alignment and is ideal for gunwales, bow/stern pulpits, or console railings.
• Secure Grip: The base’s tube socket is precision-made to match the tube diameter, providing a tight grip. A locking screw (grub screw) is typically included on the side to fix the rail in place (prevents rotation or pull-out).

Marine-grade flush latch with a D-shaped handle, crafted from polished stainless steel for corrosion resistance and a sleek look. It sits level with the surface, preventing tripping or snagging. Available in two versions – a locking model (with key) for security and a non-locking model for quick access – making it ideal for deck hatches, floor panels, and cabinets.

• Heavy-duty AISI 316 stainless steel construction for maximum durability in saltwater
• Flush design (75 x 62 x 64 mm) mounts flat, keeping decks and floors obstruction-free
• D-handle lies flush when closed and lifts easily to open a hatch or door
• Locking version (01154-2) includes an integrated lock and key to prevent unauthorized opening
• Non-locking version (01154-1) provides fast access to frequently used compartments
• Ideal for deck hatches, engine compartment covers, cabin doors, and storage lockers where a low-profile latch is needed

High-quality 90-degree elbow joint made of polished AISI 316 stainless steel, designed for connecting 22 mm diameter boat railings or tubing. This robust fitting creates a secure 90° corner for bow rails, bimini tops, and other railing systems, ensuring strength and corrosion resistance in marine environments.

• Precision-cast AISI 316 stainless steel for superior rust resistance
• Fits standard 22 mm (7/8") diameter rail/tubing commonly used on boats
• Creates a strong 90° angle connection for railings and guardrails
• Ideal for corners of bow/stern rails, bimini top frames, and dodger supports
• Tightens with internal hex (Allen) set screws for a slip-free hold on tubing
• Sleek polished finish matches other marine stainless hardware

Compact stainless steel flush pull handle ideal for hatches and cabinets, mounting flush with the surface for easy opening. With its 51 x 51 mm size and low-profile design, this handle lets you lift floor panels or compartment lids conveniently without any protruding parts getting in the way.

• Small flush-mount handle (51 x 51 mm) for deck hatches, floor boards, and cabinet doors
• Marine-grade AISI 316 stainless steel construction resists rust and saltwater
• No lock mechanism – features a pop-up ring/handle for easy grip and lifting
• Sits flat when installed, preventing trip hazards and snagging of lines or gear
• Easy to install into a pre-cut recess; comes with necessary mounting screws/hardware
• Ideal for cabin sole boards, bilge access panels, storage compartments, and even RV or furniture applications where a recessed pull is desired

Sturdy 90-degree elbow joint made of marine-grade AISI 316 stainless steel for connecting 25 mm (1 inch) diameter railing tubes. This heavy-duty fitting creates a strong right-angle link in the railings of larger boats and yachts. It offers excellent corrosion resistance and durability required for robust rail systems in demanding marine conditions.

• High-strength cast stainless steel AISI 316 construction – stands up to salt, water, and heavy loads
• Fits 25 mm (1") diameter rail tubes commonly used on larger vessels
• Provides a secure 90° corner connection for heavy-duty rail structures
• Ideal for yacht bow/stern rail corners, flybridge guardrails, radar arch frames, and hardtop supports
• Locks onto tubing with sturdy set screws (Allen key drive) for a tight, gap-free hold
• Polished mirror finish matches premium marine hardware and adds a professional look

Convenient push-button cabinet lock for boat cabinet doors and small hatches, ensuring they stay closed during voyages. Features a push-to-latch mechanism: press the button to lock (it stays recessed flush), and press again to unlock and open (the button pops out as a handle). Made of durable chrome-plated plastic and zinc alloy, this lock is lightweight, corrosion-resistant, and comes with everything needed for installation (Ø26 mm knob and trim ring included).

• Spring-loaded push-button mechanism – when closed, button latches flush; press again and it pops out to serve as a handle
• Constructed from chrome-plated plastic and zinc alloy components – corrosion-resistant and designed for marine use
• Mounts in a standard Ø26 mm hole; includes a 26 mm diameter front knob and retaining trim ring
• Keeps cabinet doors and hatches securely shut, preventing accidental opening from boat vibrations or rocking
• Ideal for cabin cabinets (galley, head), closet doors, and also for caravans/RVs where secure latching during movement is needed
• Easy installation: insert lock into the panel’s hole and tighten with the provided back ring – when locked, the knob sits flush with the panel

Heavy-duty trailer coupler lock that protects your boat trailer from theft by immobilizing the trailer’s hitch. It locks directly onto the trailer coupler, preventing the trailer from being attached to a vehicle or detached from it without the key. Made of high-strength steel with a corrosion-resistant coating, it fits standard hitch couplers (20x20 mm locking bar) and comes with a unique high-security key for added protection.

• Anti-theft hitch lock for trailer couplers – prevents unauthorized hooking or unhooking
• Solid steel construction with weather-resistant coating for outdoor durability
• Easy to install on the trailer’s coupler (hitch tongue); compatible with common coupler models, including EVAL standard hitches
• Supplied with a unique high-security key (coded) – cannot be opened or copied without the original key
• Protects boat and utility trailers when parked or stored, deterring thieves with visible security
• Compact design for convenient storage when not in use (keep it in your vehicle or toolbox)