For Boats up to 12 Meters in Length

Green starboard navigation light with a white housing – certified under COLREG72 for vessels up to 12 m. Provides a clear 112.5° beam, ensuring visibility and compliance with maritime rules at night.

• Bright green light covers a 112.5° sector (starboard side), clearly marking your boat’s right side and enhancing safety during head-on or crossing situations.
• Durable white ABS housing – resistant to UV rays, saltwater, and impacts. It retains its color and integrity for years, protecting the internal components from corrosion.
• Includes a 12V/10W “torpedo” style bulb for immediate use (can be swapped for an LED bulb if desired for even lower power draw). Provides a bright signal light visible from afar at night.
• Easily mounts with 2 screws; a gasket is provided to ensure a watertight seal at the base, keeping electrical contacts dry and reliable.

A dual-color bow navigation light (port red / starboard green) in a single housing that clearly indicates your vessel’s heading. This chromed-cap model is an elegant and functional choice for boats up to 12 m, offering:

• Bi-color light (red/green) – a combined bow lamp covering the 112.5° port sector (red) and 112.5° starboard sector (green), for a total of 225° forward. It allows easy installation on the bow in place of two separate side lights, simplifying your navigation light setup.
• Chromed ABS cover on a black base – a stylish, corrosion-resistant design. The chrome-plated cap gives a metallic shine and protects the lamp, while the sturdy black base minimizes glare and sits discreetly on the deck.
• Compact size 100×78 mm – a small footprint that makes installation easy on narrow bow platforms or railings. The low-profile design reduces the risk of snagging lines or sails.
• 12V operation (bulb included) – supplied with a standard 12V bulb (e.g., 5W or 10W) that provides bright, distinct light in each sector (~1 NM visibility, appropriate for <12 m boats). If needed, the bulb can be swapped for a 24V type of the same base for use on larger vessels with 24V systems.
• Easy installation & wiring: Two screws (hidden under the snap-on cap) secure the light to the bow. A two-wire lead (positive and negative) connects to your electrical system – both red and green sections illuminate together from the navigation light switch. A weatherproof gasket and snug-fitting cover keep water out of the internal contacts.
• Meets requirements: Approved for boats up to 12 m length, fulfilling COLREG rules for running lights (port/starboard). Visibility is approximately 1 NM, satisfying the standards for small craft. Suitable for both powerboats and sailboats.

A telescoping all-round light that extends to provide 360° white anchor light when needed and retracts completely flush when not in use. Ideal for sail and power boats up to 12 m, it doubles as a flag pole for added utility:

• 54 cm telescopic pole – raises the light to 54 cm height for excellent visibility above structures and crew. When not needed, the pole collapses/folds down into the base, hiding nearly entirely out of sight and leaving the deck obstruction-free.
• Flush-mount base – a special recessed socket installs on a flat surface (e.g., stern deck). With the pole retracted, the base sits almost flush with the deck, preventing snagging of lines or interference with boat covers. A cap for the socket is provided to keep water out when the light is removed.
• Flag holder rings on the pole – the pole is equipped with eyelets for attaching a flag. This gives it dual purpose – by day the pole can fly an ensign or club flag, and by night it becomes the anchor light (when extended).
• 12V/10W white lamp – casts a bright 360° white light, visible at least 1 NM, meeting the requirements for boats up to 12 m. The standard incandescent bulb (included) makes for easy replacement and reliable operation.
• Marine-grade materials: An anodized aluminum pole (Ø19 mm) and durable plastic base are built to resist corrosion. The mechanism withstands repeated extension/retraction and locks firmly in the upright position for stability in use.
• Recommended use: For runabouts, yachts, and fishing boats ~5–12 m whose owners want a practical “2-in-1” solution – a navigation light and flag staff. Especially useful for trailerable boats or those with covers – when stowed, the light is protected from damage and out of the way.

A compact combined bow light (for boats up to 12m) featuring red and green sectors in one housing. Made of polished stainless steel, this bi-color light mounts on a vertical surface (e.g., bow wall or pulpit) and provides 2×112.5° illumination to port and starboard. Key features:

• 2-in-1 Bi-Color Lamp: One fixture combines the red (port) and green (starboard) navigation lights. An optimal solution for the bow of small vessels – reduces the number of separate lights and simplifies installation.
• Mirror-Polished Steel: AISI 316 stainless steel housing with a mirror finish – offers a luxurious look, high corrosion resistance, and strength. The material withstands marine environments and protects the internal components.
• Vertical Mount Design: Engineered for mounting on vertical surfaces (e.g., cabin front, console dashboard, or bow rail). The light shines horizontally forward, covering the required 112.5° on each side of the bow.
• 12V Halogen Bulb: Equipped with a 12V/10W bulb (or two bulbs, one per color) – provides bright illumination with low power draw. Meets visibility requirements (approx 1 nm) for vessels <12m. Upgrade to LED is possible.
• Certified Safety: Approved per COLREG72/RINA for navigation lighting on boats up to 12m. Its compact dimensions (~80x58x38 mm) allow easy integration into the boat’s design without compromising visibility.

A white stern light for boats (up to 12m) with a 135° beam angle, made of stainless steel. Mounts on a vertical surface at the stern and provides a bright white beam visible from behind and slightly to the sides (67.5° each way). The compact polished housing ensures durability and style. Key features:

• 135° Stern Lamp: Designed to cover the sector behind the vessel – 135° horizontal angle (67.5° to port and starboard from dead astern). Bright white light marks your aft position to overtaking traffic.
• Stainless Housing: Constructed from AISI 316 stainless steel, polished to a shine. Corrosion-resistant, weatherproof build that matches other hardware. Protects the bulb and wiring inside.
• Vertical Mount: Flat back for installation on the transom, aft bulkhead, or rail. Projects light horizontally aft. Easy two-screw mounting; compact size for an unobtrusive look (~80x58x38 mm).
• 12V/10W Illumination: Fitted with a 12V 10W halogen bulb, meeting visibility requirements (2 nm for stern lights on boats <12m). Low power draw, with option to replace with an LED module if desired.
• Compatibility & Certification: Compliant with COLREG and certified for vessels up to 12m. Pairs perfectly with stainless bi-color bow lights or side lights from the same series for a complete navigation light set.

A white masthead (steaming) light for power-driven mode on boats (up to 12m) with a 225° illumination sector. Stainless steel housing (AISI 316) for vertical mounting high above the deck (mast or cabin top). Shines forward in a 225° arc (from one abeam to the other), indicating the vessel is under engine power. Compact, bright, and certified. Key features:

• 225° Steaming Light: Emits white light forward and to the sides (225° total) – covers the sector from 22.5° abaft the beam on one side to 22.5° abaft the beam on the other. Used as the masthead light when sailing vessels are under power or continuously on powerboats.
• Stainless Steel Housing: Rugged and sleek polished stainless steel body, protected against corrosion and impact. Matches other stainless lights, ensuring durability and water-resistance of the unit.
• Vertical Mount, Elevated: Flat back for installation on a mast, masthead, or superstructure (hardtop/arch above cabin). Must be positioned at least 1m above sidelights (per regulations). Easy screw mounting; small footprint (~80x58x38 mm).
• 12V/10W Bulb: Includes a 12V 10W halogen bulb, providing a strong beam visible at least 2 nm (requirement for masthead lights on <12m). Can be replaced with LED if needed, maintaining brightness.
• Compliance & Integration: COLREG approved for vessels <12m. Complements the stainless bi-color and stern lights in the series perfectly. Mandatory for motorboats and sailboats under engine – shows that the vessel is underway by power.

Premium green navigation light made of polished stainless steel for the starboard side, covering a 112.5° arc. Certified under COLREG72 for vessels up to 12 meters, this light offers durability and style with its AISI 316 stainless construction. Includes a 12V/10W halogen bulb (upgradeable to LED) to ensure reliable, bright illumination for safe nighttime navigation.

• Marine-grade stainless steel: Polished AISI 316 housing is corrosion-resistant and adds a sleek look.
• 112.5° starboard beam: Green light covers the standard angle for the starboard side as per navigation rules.
• COLREG72 compliant: RINA type-approved for boats up to 12 m, ensuring legal and safe operation.
• Bulb included: Comes with a 12V/10W halogen bulb; LED replacement compatible (sold separately).
• Vertical mount design: Easy to install on a vertical surface for optimal visibility and correct light positioning.

Red navigation light for the port side made of polished stainless steel, covering a 112.5° sector. Built with a premium AISI 316 stainless steel housing and certified under COLREG72 for vessels up to 12 m. Supplied with a 12V/10W halogen bulb (LED upgrade optional). A robust, stylish, and reliable solution to keep you safe and compliant during nighttime voyages.

• Premium stainless build: Polished AISI 316 steel construction resists corrosion and harsh marine environments.
• 112.5° port beam: Red light covers the standard port-side angle (112.5°) as required by navigation rules.
• Safety certified: RINA approved, COLREG72 compliant for boats up to 12 m, ensuring legal compliance and visibility.
• Ready to go: Includes a 12V/10W halogen bulb; compatible with LED bulb upgrades for energy efficiency.
• Easy installation: Designed for vertical mounting on a flat surface, providing correct orientation and wide visibility.

Pair of navigation lights (red and green) in a white plastic housing, suitable for boats up to 12 meters long. Made from reinforced polycarbonate and glass-fiber nylon, these lights are weather-resistant and meet COLREG72 standards. Each comes with a 12V/10W bulb to provide clear port and starboard illumination for safe night boating.

• Complete set: Includes red (port side) and green (starboard side) lights for full navigation lighting.
• Durable white housing: Impact-resistant polycarbonate with fiberglass reinforcement for long-lasting use.
• For boats up to 12m: Certified to COLREG72 and Greek Ministry approved for vessels ≤12 meters.
• 12V/10W bulbs: Each light is equipped with a 12V/10W bulb, offering bright beams visible from afar.
• Easy installation: Compact size (approx. 9 cm length) allows flexible mounting on the sides of small boats and RIBs.

Pair of LED navigation lights (red and green) with stainless steel bodies, providing modern, bright, and energy-efficient lighting for boats up to 12 meters. These lights are fully waterproof (IP67) and meet international standards (ABYC-16 compliant, USCG 2 NM visibility). 12V LED modules (0.9W each) ensure minimal power draw and exceptionally long service life.

• LED technology: Built-in LEDs deliver powerful illumination with minimal energy use and no bulb replacements.
• Stainless steel: Polished INOX housing offers maximum durability and a sleek, modern look.
• IP67 waterproof: Engineered to withstand submersion and heavy splashes – ideal for harsh marine environments.
• High visibility: Meets ABYC A-16 and USCG 2NM standards, exceeding typical visibility requirements for ≤12m boats.
• Complete set: Red (port) and green (starboard) lights included, easy to install – perfect for upgrading older halogen lamps.