Fittings and elements

Secure your boat ladder effortlessly with this Plastic Ladder Clamp, designed to fit tubes with diameters of 22 mm and 25 mm. Crafted from durable plastic, this clamp ensures a reliable hold, keeping your ladder firmly in place during marine activities.​

• Durable UV-stabilized plastic ladder holder clip – secures boarding ladders or tubing (22–25mm diameter) on board
• Prevents ladder movement during navigation – keeps folding or removable ladders firmly in place, avoiding noise and damage
• Universal design fits most boat ladders with 7/8″ to 1″ tubing (standard 22–25mm) and can also hold boat hooks, poles, or pipes
• Easy installation: 76mm long base with pre-molded countersunk holes – mount with two screws on any flat surface (screws included)
• Available in multiple colors (white, grey, blue) to match your boat’s aesthetics while providing secure and convenient ladder storage

This clamp is an essential accessory for maintaining the safety and stability of your marine ladder, providing peace of mind during your nautical adventures.

Spare step for boat rope ladders – a durable plastic rung with non-slip texture. Measuring 30×7 cm and featuring ∅25 mm rope holes, this step lets you quickly repair a broken or worn rope ladder, restoring safe boarding access.

• Made of reinforced, UV-resistant plastic material (grey color)
• Textured, non-skid top surface for sure footing even when wet
• Standard dimensions (30 cm length, 7 cm width, ~2.5 cm thick) – compatible with most rope ladders
• Pre-molded holes fit rope up to 25 mm diameter; installs easily by threading rope and knotting securely
• Perfect for replacing broken rungs or extending an existing rope ladder on your boat

Replacement plastic cap for rope ladder steps, designed to secure the step to the rope and provide a finished protective end. This small but crucial component (EVAL code 00594) fits standard ladder rungs and ensures your rope ladder remains safe and stable in use.

• Reinforced UV-resistant plastic – withstands marine conditions without cracking
• Compatible with EVAL spare steps (code 04263) and rope ladder models (code 04264)
• Easy to install: snaps onto the end of the step to lock the rope and prevent slippage
• Protects the rope knot and step end from wear; gives your ladder a finished look
• Low-cost, high-impact part – extends the life of your rope ladder by keeping it secure for boarding

Stainless steel mounting base for a boarding/platform ladder – size 200×40 mm. This spare base (AISI 316) provides a strong, stable attachment point for folding or telescopic ladders on your swim platform or transom. Compatible with EVAL ladder models 00553/00554, it’s the perfect solution to replace a corroded bracket or to add a second mounting location for your ladder.

• Marine-grade 316 stainless steel construction – rustproof and saltwater resistant
• Standard 20×4 cm size – fits two-post transom ladders with U-shaped mounting prongs
• Pre-drilled bolt holes – allow secure installation on wooden or fiberglass platforms
• Ensures firm support: prevents the ladder from wobbling or detaching during boarding
• Use as a primary ladder socket replacement or install as a secondary base (e.g. port/starboard side)

A stainless steel replacement hinge (joint) for folding boat ladders. Designed for tubes with Ø25 mm diameter, it enables the ladder to fold or be easily detached from the boat. Corrosion-resistant and built for marine use.

• Durable hinge made of polished stainless steel – connects two ladder sections or ladder to a mounting base, providing articulation.
• Fits Ø25 mm tubes (standard diameter for many boarding ladders); also available in other sizes if needed.
• Allows quick folding/removal of the ladder when not in use, or easy detachment for transport/storage.
• Quality AISI 304/316 stainless steel – will not rust or warp, even with constant water exposure.
• Easy to install onto the ladder side rails – secures with screws or rivets; compatible with a deck mounting bracket (sold separately) for a complete removable ladder system.

A durable mounting base for a boarding/swim ladder, made from corrosion-resistant alloy. This bracket bolts securely to the deck or swim platform and serves as a fixed socket point for the ladder. It fits tubing up to 25 mm in diameter (including standard 22 mm) – a universal solution for various ladder models. It provides a stable hold that prevents the ladder from slipping or wobbling during use, and allows the ladder to be detached quickly when needed.

• Material: Marine-grade stainless steel / chrome-plated bronze – robust construction resistant to saltwater and load.
• Diameter: For tubes up to Ø25 mm (also works with Ø22 mm by tightening) – universal fit for most ladders.
• Mounting: Attaches to deck/platform with bolts (pre-drilled screw holes provided).
• Function: Secures the bottom of the ladder – prevents movement and ensures safety while boarding.
• Use: Ideal as a spare (replace a worn base) or to add a second ladder mounting point on another side of the boat.

Universal plastic ladder catch suitable for 22–25 mm diameter ladder tubes. It provides a secure attachment point for removable or folding boarding ladders, preventing unwanted detachment or rattling while underway. Available in two colors to match your boat’s aesthetics.

• Durable UV-resistant plastic construction for long life in marine environments
• Fits Ø22–25 mm tubing – the standard size for most boat ladders
• Easy snap-in design allows quick attachment and removal of the ladder
• Secures the ladder firmly to prevent wobbling or hull scratches during use
• Available in grey (00576-G) or white (00576-W) to blend with your boat’s deck or hull

• Metal ladder socket/bracket for boarding ladders – provides a mounting point for removable ladders
• Compact flange size ~70×37 mm, low-profile design for a flush installation
• Approx. 25 mm inner diameter – fits standard ladder tubes (7/8″–1″)
• Easy to install with two bolts; typically used in pairs (port/starboard) for ladder stability