Covers

Protect your inflatable boat with our high-quality 600D cover, engineered to withstand all weather conditions. This heavy-duty cover shields your boat from UV rays, rain, dust, and mildew, giving you peace of mind during storage or transport.

• Durable 600D Polyester Fabric (PU Coated) – completely waterproof and UV-resistant for maximum protection.
• Reinforced Ripstop Weave – the fabric is enhanced to resist tearing and abrasion, ensuring a long service life.
• Mold & Mildew Resistant – designed not to trap moisture, preventing mold growth during extended coverage.
• Elastic Hem & Adjustable Straps – provide a snug fit around your boat and secure the cover against wind or while trailering.

Give your open boat (plastic or aluminum hull) complete protection with this high-quality 600D cover. It’s designed to shield your boat’s hull and interior from sun, rain, leaves, and dust, thereby extending the lifespan of your vessel.

• High-Strength 600D Polyester (PVC/PU coated) – withstands heavy rain, snow, and intense sun without leaking or fading.
• Flexible, Reinforced Design – features strengthened seams and a cut that wraps securely around the boat’s bow and stern.
• Breathable & Mildew-Resistant Fabric – prevents condensation and mold growth underneath the cover during long-term storage.
• Adjustable Fit – elastic edging and included ropes/straps ensure the cover stays firmly in place even in wind or during transport.

Shield your center-console or windshield boat with this specialized 600D cover. Designed for day cruiser and RIB boats with consoles, it provides full protection for the entire hull – including the console and seating areas – against harsh weather elements.

• Thick 600D Polyester (silver UV coating) – reflects sunlight and guards your boat against scorching sun and heavy rain.
• Raised Middle Profile – the cover’s cut is taller in the center to accommodate consoles/windshields and to allow water to run off.
• Adjustable straps & clips – make it easy to secure the cover under the hull and around the console, ensuring stability in wind and during transport.
• UV & Mildew Resistant Fabric – the dense material prevents UV damage and won’t foster mold even with prolonged use.

Designed for cabin boats and cruisers, this 600D cover provides maximum stem-to-stern protection – including the cabin superstructure. Keep your cabin boat dry and clean through all seasons with a durable cover that withstands UV rays, rain, snow, and salty sea air.

• Ultra-Tough 600D Marine Fabric – repels water and resists fading, ideal for prolonged outdoor use.
• Extended Cabin Height – a special design that covers the boat’s entire cabin/coach roof, protecting windows, hatches, and electronics.
• Extra Reinforced Seams – critical areas are strengthened to endure tension from wind and water pooling.
• Secure Fastening – comes with strong ropes/straps to tie down under the hull; elasticated panels ensure a tight wrap around the boat.

Premium outboard engine head cover (for the top cowling only) made from heavy-duty waterproof Oceansouth ATLAS 340 g/m² fabric in grey. It protects your engine from UV rays, rain, dust, and impacts, with a soft inner lining to prevent paint scratches. Available in 7 different sizes for 2-stroke and 4-stroke engines (from 2–4 HP up to 175–250 HP), ensuring a snug fit over the engine cowling.

• Waterproof and UV-resistant ATLAS™ polyester (340 gsm) – won’t fade and keeps rain out
• Soft inner lining – safeguards your engine’s paint finish from scratches during storage or transport
• Reinforced and sealed seams – ensure durability and strength against wind and highway speeds
• 7 sizes: range covers 2–4 HP, 5–15 HP, 15–30 HP, 30–60 HP, 60–100 HP, 115–150 HP, 175–250 HP – a proper cover for every engine size
• Easy slip-on design with elasticized hem – quickly stretches over the engine top and grips securely without extra straps

Durable full-coverage outboard engine cover made of heavy-duty 340 g/m² polyester with waterproof coating and UV protection. Shields your motor from rain, sun, and dust during storage or transport. Suitable for all 2-stroke and 4-stroke engines from 2HP up to 350HP, with 10 size options to ensure a perfect fit:

• Rugged 340g/m² fabric – waterproof, UV-resistant ATLAS™ polyester with soft inner lining that prevents scratching your engine’s paint.
• Reinforced seams & zip – all seams are double-stitched and sealed; a heavy-duty #10 nylon zipper along the side makes installation easy.
• Complete engine coverage – encloses the entire outboard (cowling and lower unit) for maximum protection during storage or trailering.
• Sizes for every motor – available sizes for small portable 2–3.5HP engines up to large V6/V8 outboards 300+ HP; elastic hem and adjusters ensure snug, wind-resistant fit.
• Easy on/off & stowage – quick to slip over your motor and secure under the skeg; stays put in wind when properly secured, and folds neatly for compact storage when not in use.

A handy clear spray shield for boats with T-top, acting as a windshield that blocks wind and sea spray without impeding your view. Installs easily under your T-top using adjustable straps and buckles, providing protection for your console and crew at speed or in rough conditions:

• Clear PVC panel – provides unobstructed forward and side visibility while deflecting wind and spray.
• Tough & weatherproof – made of heavy-duty transparent vinyl with excellent weather resistance and reinforced top and bottom edges for durability.
• Quick installation – polyester webbing straps with buckles secure it tightly to the T-top frame; sets up in minutes with no tools required.
• Universal fit – available in two sizes (width 2.63 m or 3.03 m) to suit various T-top dimensions; fits console widths up to ~70 cm (small) or larger consoles over 70 cm (large).
• Removable when not needed – easily unclip and roll up the screen when not in use; stows compactly without cluttering your deck.

Professional heat-shrink wrap film for covering and protecting boats during storage or transport. White polyethylene film, 200 microns thick with UV inhibitor (12-month UV resistance). Supplied in 50 m rolls of various widths (6 to 16 m) to cover boats from small to very large:

• Robust protection – heavy 0.2mm film, tear-resistant, shields against dirt, moisture, UV rays, and minor impacts.
• UV-stable white – reflects sunlight and keeps interior cool; special additives ensure at least 1-year sun exposure without degradation.
• Easy application – simply drape over the boat from bow to stern and use an industrial heat gun to shrink it tight to the shape.
• Multiple widths – available rolls: 6m, 8m, 10m, 12m, 14m, 16m wide (each 50m long), to accommodate boats of different sizes and heights.
• Professional result – once shrunk, the film forms a drum-tight cover that withstands wind and snow; ideal for winter storage or safely hauling your boat.

Specialized cover for boats with T-tops that envelopes the entire steering console plus the helm seat/bench. Made of heavy-duty 260 g/m² polyester (grey) that is UV-resistant and waterproof. Easy to fit and secure under the T-top, providing reliable protection for your electronics and console:

• Full console coverage – protects the helm console, wheel, electronics and the driver’s seat/backrest under the T-top, keeping them dry and clean.
• Easy to install – slips over the console and attaches under the T-top; features a sturdy nylon zipper for a snug closure and elastic straps around and beneath the seat for a tight fit.
• Durable 260 g/m² fabric – breathable polyester with PU coating, waterproof and UV-proof; stands up to marine conditions without fading or tearing.
• Universal sizing – comes in 2 sizes: Medium (for consoles up to ~150 cm width) and Large (for wide consoles up to ~183 cm width); both approximately 180 cm tall to cover from deck to above the seat.
• Secure fastening – built-in elastic cords and buckle straps wrap around the console above and below the seat, ensuring wind-resistant stability; the zip closure allows a fully sealed cover.

Robust cover for jet skis, made from waterproof 300D polyester with PA/PU coating. Provides superior protection for your personal watercraft from sun, rain, dust, and debris, especially during storage out of water or off-season. Available in 3 sizes to fit different jet ski types:

• 300D heavy fabric – tear-resistant polyester with double-stitched seams, withstands UV rays and heavy rain; inner PA coating for complete waterproofing.
• Full coverage – covers the entire jet ski (hull, seat, handlebars), shielding it from fading, scratches, and dirt during storage or transport.
• Elastic hem – integrated elastic around the bottom edge for a snug fit to the hull; additional tie-down straps keep the cover secure in wind or when trailering.
• 3 sizes available – S for small jet skis (~260-290 cm length), M for standard 2-3 seater models (~270-320 cm), L for large 3-seater and touring models (~300-340 cm length, extra width).
• Easy to use – lightweight yet tough cover stretches over your jet ski in a minute; when removed, it folds neatly into the included storage bag.