Two-component building anti-osmotic primer Sea-Line® EPOXY PRIMER Antiosmotic

• 2-component high build epoxy primer.
• Does not contain laminate-penetrating solvents.
• Recommended for protecting yachts and boats below the waterline.
• Repairs osmotic bubbles formed in the laminate.
• Can apply up to 150 microns in one coat.
• Provides antiosmotic protection in two layers (300 um).
• Good flow gives a perfect finish.
• Easy to mix and apply.
• Caution: do not drip onto vertical surfaces.
• Cans contain components and room for mixing them.
• First layer: Raw surface, epoxy or polyester filler, epoxy primers, paint cleaned prior.
• Second layer: epoxy primer, polyurethane topcoat, antifouling paints.
• Does not require sanding between coats while maintaining the suggested time interval.

Type: GRP laminates, steel, aluminium
Place: Above and below waterline
Function: Filling, Antiosmotic
Application: brush, roll, spray gun
Thinning: Not recommended 0 – 5 %
Theoretical coverage For 1l: 6-7 m2 for 150 μm WFT/ 150 μm DFT
Number of coats: 1 – 4
Pot life 20°C: 0,45 h
Time between layers without sanding: 8 h – 72 h
Color: Dark grey