EVAL

Heavy-duty marine battery selector switch rated 300 A continuous / 500 A peak (variant 01638‑3: 450 A peak). Available in ON/OFF, 1‑2‑BOTH, and dual-circuit versions. Compact 71.8 × 71.8 mm with corrosion-resistant parts and integrated security key.

Compact marine-grade ON/OFF battery switch rated 250 A continuous / 350 A instantaneous at 12 V. Ideal for secure battery isolation on small to medium vessels.

Manage two batteries with one reliable marine switch! This rotary dual battery selector (positions Battery 1 / Battery 2 / Both / Off) is rated for 175 A continuous and 300 A peak. Its rugged housing (140x140 mm) and make-before-break design ensure you can switch between batteries safely without power loss.

• Functions: 4 positions – Off, Battery 1, Battery 2, or Both (parallel)
• Current Capacity: 175 A continuous load; 300 A momentary (cranking current)
• Housing: Durable ABS plastic, impact-resistant and marine-grade; panel size 140x140 mm
• Safety: Make-before-break contacts prevent voltage spikes and protect electronics during switching
• Installation: Suitable for surface or flush mounting; includes clearly labeled rotary knob and mounting hardware

Disconnect and safeguard your battery with this heavy-duty marine ON/OFF master switch. Compact yet powerful, it handles 275 A continuous (600 A peak) and suits 12 V, 24 V, and 48 V systems. The rugged ABS housing (68×68 mm) and UV-resistant design make it ideal for boats, RVs, and solar setups.

• Function: Two-position switch – ON (battery connected) / OFF (battery isolated) for a single battery or entire circuit
• Current Capacity: 275 A continuous load; 600 A peak (cranking up to 1250 A for short bursts)
• Voltage: Compatible with 12 V, 24 V, or 48 V DC systems (versatile use across applications)
• Construction: Compact 68×68 mm body for easy installation; resistant to moisture, corrosion, and vibration
• Benefits: Prevents battery drain during storage, avoids short circuits during maintenance, and doubles as an anti-theft deterrent

Robust marine-grade ON/OFF switch with protective flip-top cover. Rated 280 A continuous and 2,500 A instantaneous, designed for recessed 80 mm mounting and fast power disconnection.

Tubular radar reflector, 50 cm length and 50 mm diameter, suitable for medium-sized motorboats and sailboats. The reflective elements are enclosed in a plastic cylindrical housing, which makes it easy to mount outdoors (masts, rails) and protects them from the elements. This type of reflector improves your vessel’s radar profile, especially when mounted vertically, and is an efficient, low-profile way to enhance safety at sea.

• Tube design – 50mm diameter cylinder containing internal aluminum reflective plates arranged for maximal reflection of horizontal radar beams
• 500mm length – sufficient reflective length for a good radar cross-section (up to ~2 m² effective area), yet compact enough for installation
• Plastic housing – durable ABS shell, UV-resistant and impact-proof, protecting the reflector and providing a neat appearance; no sharp edges, safe to handle on deck
• Easy mounting – includes brackets/clamps for attaching to a mast or rail; can be installed vertically for optimal performance or on an angled mount on the cabin top
• Safety improvement – increases the range at which your boat (~16–23 ft) can be detected by radar, without taking up space or requiring complex setup

Replaceable gas canisters for air horns – available for both push-in (snap-on) horn heads and screw-in horn mechanisms. Each canister contains ozone-friendly propellant gas in a pressurized metal bottle. Standard volume ~300 ml for loud, attention-grabbing blasts. Keep a spare on board to ensure your fog horn or signal horn never runs out.