Five-marine

Effortlessly transport your small boat or dinghy across land with these heavy-duty folding transom wheels. Made of polished AISI 316 stainless steel with large 260 mm wheels, they flip down for launching or up and out of the way while boating. A must-have accessory for easy single-handed launching on ramps, beaches, and marinas.

• Premium Stainless Steel: Constructed from marine-grade AISI 316 stainless steel for maximum strength and corrosion resistance in fresh or salt water.
• Fold-Up Design: Innovative folding mechanism allows wheels to lock down for use or flip up when not needed, avoiding drag in the water.
• Large 260 mm Wheels: Sturdy Ø260 mm rubber wheels provide smooth rolling over sand, gravel, and uneven terrain without bogging down.
• Universal Fit: Adjustable transom mounting brackets fit most inflatable boats, RIBs, and small aluminum or fiberglass dinghies for versatile use.
• One-Person Launch: Enables single-handed launching and retrieval of your boat – no trailer required – saving time and effort at the boat ramp.

Provide a stable support for your boat cover with this lightweight yet sturdy telescopic pole made of anodized aluminum. Its adjustable design lets you set the perfect height to prevent water from pooling on the cover, keeping your boat dry and the cover taut.

• Adjustable Height – available in two models with ranges 60–100 cm or 90–150 cm, accommodating the needs of different boats and cover sizes.
• Anodized Aluminum – lightweight, rustproof material that withstands saltwater and corrosion, ensuring a long service life.
• Wide Base & Cap Tip – a stable base prevents sliding on your boat floor; the top cap fits beneath the cover, distributing pressure evenly.
• Prevents Water Pockets – props your cover up like a tent, so rainwater and snow run off instead of pooling and sagging the cover.

A high-quality stainless steel end fitting for boat canopies (bimini tops) – an extended style for Ø22 mm or Ø25 mm tubes. This component replaces or upgrades standard plastic tips, providing a stronger connection and greater clearance when folding. Key features:

• AISI 316 stainless steel: Polished to a shine, fully corrosion-resistant – ensures reliability and a sleek look.
• Available in 2 sizes: Model 03831-1 fits Ø22 mm (7/8") tubing, and model 03831-2 fits Ø25 mm (1") tubing. Covers the most common bimini frame diameters.
• Extended design: A longer neck on the fitting allows a wider folding angle and extra clearance – prevents the canvas or frame from hitting the boat when lowered.
• Secure connection: Precisely drilled hole for the securing bolt/pin (standard ~6 mm) that provides a tight hinge joint with the deck hinge. No unwanted play or rattle in waves.
• Easy installation: Inserts into the tube end and locks with a screw or rivet. Ideal for replacing broken tips or upgrading from plastic to metal.

A compact, durable flagpole base for boats that clamps onto standard railings. Made of stainless steel for marine use, it fits flagpoles up to 14 mm in diameter and provides a secure, stable mount for your boat’s flag. Installation is quick and drill-free, and the base is built to withstand harsh sea conditions.

• Marine-grade stainless steel construction for maximum corrosion resistance
• Easy clamp-on rail mount – no drilling required for installation
• Fits 14 mm flagpoles – standard size for most boat flags
• Secure and stable hold – keeps your flag steady even in strong winds
• Ideal for sailboats and motorboats – proudly fly ensigns or pennants on your rail

Premium telescopic support pole for bimini tops made of stainless steel, adjustable from 75 to 120 cm for perfect canopy positioning. Provides a stable, corrosion-proof support for your boat canopy, eliminating the need for fabric straps and improving overall rigidity.

• High-polish AISI 316 stainless steel construction – excellent strength and rust resistance
• Adjustable length from 750 to 1200 mm – adapts to various canopy heights and angles
• Two-section tubing (Ø22 mm inner, Ø25 mm outer) – fits standard bimini frame fittings
• Replaces nylon straps with a rigid support arm – reduces movement and canopy flutter in wind
• Simple locking mechanism for length adjustment (twist-lock or pin-lock) – quick setup with no tools required

Lightweight yet sturdy telescopic support pole for bimini tops, made of aluminum and adjustable from 72 to 121 cm. Ideal for smaller and mid-sized boats, it provides reliable support for your canopy without adding much weight. The aluminum pole is anodized to resist corrosion, ensuring smooth operation and longevity.

• Anodized aluminum construction – extremely light, with no rust issues in freshwater environments
• Length range of 720–1210 mm – adjusts to your boat’s height and desired canopy angle
• Two-section design (Ø19 mm inner, Ø22 mm outer) – standard sizing for many small-boat bimini frames
• Supplies rigid support to reduce canopy sway – more stable than straps in moderate conditions
• Quick locking mechanism (clamp or push-button) – enables instant length adjustment and easy collapsing for storage

High-quality stainless steel thimble (metal eye) for forming strong, long-lasting loops in rope ends. It protects the rope from chafing and increases the loop’s load capacity. Available in sizes for ropes from 4 mm up to 20 mm diameter:

• AISI 316 Stainless: Maximum corrosion resistance in saltwater – ideal for marine use and any outdoor application
• Robust Construction: Solid bent metal with smooth U-shape – takes the load without cutting into the rope fibers
• Full Size Range: From small thimbles for 4–6 mm ropes (flags, small craft) to large 18–20 mm (mooring, anchor, towing lines for yachts)
• Easy Installation: Inserts into the eye of a rope loop during splicing or knotting – provides a hard reinforcement for shackles, carabiners, and hooks
• Versatile Use: For any rope eye – anchor rodes, dock lines, towing bridles, rigging lines, rope swings and hammocks, industrial slings, and more

A soft cushion for boat seats that enhances comfort and prevents seating surfaces from getting too hot. Made with marine-grade UV-resistant fabric and high-density foam that withstands water. Available in 3 sizes to fit different seat types – single or double. Key features:

• Durable vinyl cover that resists UV rays, saltwater, and fading
• Thick high-density foam (~6 cm) providing comfortable support for extended sitting
• Easy attachment to seat (via snap buttons or Velcro strips depending on seat model) and quick removal for cleaning or storage
• Suitable for hard plastic seats, locker tops, or bench surfaces – stays in place and improves appearance
• Comes in multiple size options (matching EVAL seat code 04874 variants) for a perfect snug fit without gaps

A stainless steel mooring spring designed to absorb shocks and vibrations in dock lines. It installs between the boat and dock to provide elastic “cushioning” under wind and wave stress. Available in multiple sizes to match rope thickness and boat size:

• AISI 316 Stainless Material: Marine-grade inox steel – resists rust, salt, and constant tension
• Streamlined Design: Compact coil spring that takes load smoothly and silently – endures thousands of stretch/compression cycles
• Spring Gauges: 6 mm, 7 mm, 9 mm, 10 mm (suitable for boats up to ~8 m, ~10 m, ~12 m, ~14 m respectively)
• Easy Installation: Attaches to the line via shackles or rope loops at both ends – insert between boat and dock without altering your existing lines
• Safer Mooring: Reduces sudden boat movement, protects cleats and lines from extreme strain, and increases onboard comfort while moored

A stainless steel drain plug with a conical shape that ensures quick and secure sealing of the drain opening. The special tapered design allows it to wedge in tightly for a watertight fit with minimal effort.

• All-stainless-steel construction – high durability and corrosion resistance in marine environments
• Conical plug that inserts snugly into its base for instant, leak-proof closure
• Fitted rubber O-ring gasket on the plug prevents drips and absorbs vibrations
• Ideal for mid-sized boats (~5–7+ m) that require dependable manual bilge drainage
• Easy to insert and remove even with wet hands – the plug’s shape offers a good grip and won’t bind or seize in place