Osculati

Flush‑mount marine battery switch (OFF‑1‑2‑PARALLEL) rated 300 A continuous / 450 A peak. Flame-resistant PC/PTB casing, copper contacts, stainless spring, ISO‑certified.

A versatile 30A (220V) marine shore power plug made of durable polycarbonate with silver-plated brass contacts. It features a secure cable locking system for firm attachment and carries an IP56 rating, making it safe to use in wet conditions. This plug provides reliable power to medium-sized boats and yachts.

• Standard Amperage: Rated 30A at 220V – ideal for mid-sized sailboats and motorboats. Supports powering typical onboard appliances, air conditioning, water heaters, and chargers simultaneously, covering the needs of a standard yacht.
• Premium Materials: Tough polycarbonate housing that resists impact and UV degradation for long service life; the contact pins are silver-plated brass, ensuring superior conductivity and protecting against rust and oxidation.
• Marine Waterproofing: IP56 rating – the plug is protected against powerful water jets, heavy rain, and seaspray. It can be used on an open deck without risk of short-circuiting when splashed (not intended for full submersion).
• Cable Lock System: An integrated cable clamp secures the incoming shore cable firmly to the plug. This prevents the connection from pulling out or wobbling under tension and relieves strain on the electrical terminals.

Flush-mount MKIII battery switch with OFF–1–Parallel positions, 300 A continuous / 450 A peak. Copper contacts, stainless springs, flame-resistant PC/PTB housing, ISO‑8846 certified.

Compact marine-grade ON/OFF battery switch rated 300 A continuous / 450 A intermittent / 1000 A start (5 sec). Side cable exits, wall or panel mount, ISO‑compliant.

Heavy-duty marine battery switch rated 290 A continuous / 2,500 A peak (5 s), with splash-proof removable key and polycarbonate body. Flange-mountable, CE-approved.

A rugged 30A (220V) waterproof deck socket for shore power, made from white ABS plastic (Luran) with an IPX7 protection rating. It features a spring-loaded self-closing cover that shields the inlet terminals from water when no plug is connected. This socket is mounted on the boat and allows safe connection of a 30A shore power plug from the dock to the vessel’s electrical system.

• Deck Inlet: A round, watertight connector for installation on the boat’s deck or hull. It serves as the female receptacle (with male pins) on the vessel, into which the shore power cable plugs.
• Marine-Grade Materials: The housing is crafted from high-strength ABS (Luran) plastic, which resists UV rays and weathering – ensuring long life without cracking or yellowing. The internal contact pins are silver-plated brass, protected against corrosion for stable electrical conductivity.
• Fully Waterproof: The IPX7 rating means the unit withstands full immersion in water (up to 1 meter for 30 minutes). The cap closes tightly with a snap latch and rubber gasket, keeping water and moisture away from the electrical prongs when the inlet is not in use.
• Easy Installation: Designed to fit standard cutouts for 30A inlets. It comes with a base gasket and stainless steel mounting hardware. The backside has a protective cover over the wire connections, guarding the wiring from strain and moisture entry.

A 30A deck inlet made of premium AISI 316 stainless steel, combining a sleek appearance with maximum IPX7 protection. The mirror-polished, spring-closing cap keeps water out of the connection even under heavy seas. This stainless inlet is ideal for luxury yachts and marine vessels where reliability, strength, and corrosion resistance are paramount.

• Stainless Steel Build: Body and cap crafted from marine-grade 316 stainless steel with a mirror finish. Highly resistant to corrosion in saltwater and extremely durable – retains its shine and structural integrity for years.
• High Waterproof Rating: IPX7 – fully waterproof against immersion. Precision rubber gaskets and the cap’s locking latch ensure no water penetrates inside when the lid is closed.
• 30A Capacity: Designed for 30A/220V shore power, with heavy-duty electrical pins (nickel/silver-plated) for reliable transfer of high currents without overheating. Conforms to standard dimensions to mate with corresponding 30A shore power plugs.
• Secure Installation: Mounts firmly to the deck; supplied with stainless steel hardware. Includes a rear plastic cover over the wire terminals to shield them from moisture and relieve strain on the cable.

A low-profile 30A deck inlet from the “New Edge” series, made of white ABS plastic, designed for modern boats. It offers IP56 protection against splashes and rain, and features a sleek flat cover with snap closure. This socket is compatible with both standard 30A plugs and 16A Marinco/Hubbell plugs, making it a versatile solution for various shore power systems.

• Sleek Design: The “New Edge” style is characterized by a low profile and elegant look. The white plastic flange sits flush on the deck with no protruding parts, reducing the risk of snagging lines or tripping.
• Universal Compatibility: The special construction allows the inlet to accept a 30A plug, and thanks to its adaptive opening – also a standard 16A (European/Marinco) plug. This means the boat can connect to a 16A supply with an appropriate cable without needing a separate inlet.
• IP56 Protection: The socket withstands strong water spray and seasplash. The snap-shut lid and internal gasket keep the electrical components dry during rainy weather or waves on deck (not fully submersible, but more than sufficient for above-water conditions).
• Easy Installation & Service: Installs quickly with the included screws; its dimensions match standard 30A cutouts. The inner module can be removed for access to the terminals, simplifying the wiring process. A built-in strain relief at the back secures the wires and prevents chafing or pull-out.

A 30A “New Edge” deck inlet with a chrome-plated plastic cover for a stylish appearance. It combines the light weight of an ABS construction with a mirror chrome finish, providing IP56 protection against splashes. Compatible with both 30A and 16A (Marinco/Hubbell) plugs, it offers flexibility in connectivity. An ideal choice for boats that want style without compromising functionality.

• Sleek Aesthetics: The chromed cover and flange give a luxurious, metallic look resembling stainless steel, but on a lightweight plastic base. The inlet matches other chrome accents on deck and enhances the yacht’s overall appearance.
• Lightweight & Strong: The core is ABS plastic, which will not corrode. The chrome plating is UV-resistant and saltwater-resistant – it won’t peel or rust, maintaining its shine with proper care.
• Marine Protection: IP56 waterproofing shields the interior from rain and waves. The snap-close lid with gasket ensures the electrical pins stay dry in wet conditions (the inlet is not for submersion, but it is built to handle heavy spray).
• Flexible Use: Supports 30A connections for 220V shore power and allows the use of 16A plugs via a suitable adapter. This means that regardless of the power source type (standard European 16A or dedicated 30A), your boat can connect without hassle.