Electrical Equipment

A rugged 30A (220V) waterproof deck socket for shore power, made from white ABS plastic (Luran) with an IPX7 protection rating. It features a spring-loaded self-closing cover that shields the inlet terminals from water when no plug is connected. This socket is mounted on the boat and allows safe connection of a 30A shore power plug from the dock to the vessel’s electrical system.

• Deck Inlet: A round, watertight connector for installation on the boat’s deck or hull. It serves as the female receptacle (with male pins) on the vessel, into which the shore power cable plugs.
• Marine-Grade Materials: The housing is crafted from high-strength ABS (Luran) plastic, which resists UV rays and weathering – ensuring long life without cracking or yellowing. The internal contact pins are silver-plated brass, protected against corrosion for stable electrical conductivity.
• Fully Waterproof: The IPX7 rating means the unit withstands full immersion in water (up to 1 meter for 30 minutes). The cap closes tightly with a snap latch and rubber gasket, keeping water and moisture away from the electrical prongs when the inlet is not in use.
• Easy Installation: Designed to fit standard cutouts for 30A inlets. It comes with a base gasket and stainless steel mounting hardware. The backside has a protective cover over the wire connections, guarding the wiring from strain and moisture entry.

Disconnect and safeguard your battery with this heavy-duty marine ON/OFF master switch. Compact yet powerful, it handles 275 A continuous (600 A peak) and suits 12 V, 24 V, and 48 V systems. The rugged ABS housing (68×68 mm) and UV-resistant design make it ideal for boats, RVs, and solar setups.

• Function: Two-position switch – ON (battery connected) / OFF (battery isolated) for a single battery or entire circuit
• Current Capacity: 275 A continuous load; 600 A peak (cranking up to 1250 A for short bursts)
• Voltage: Compatible with 12 V, 24 V, or 48 V DC systems (versatile use across applications)
• Construction: Compact 68×68 mm body for easy installation; resistant to moisture, corrosion, and vibration
• Benefits: Prevents battery drain during storage, avoids short circuits during maintenance, and doubles as an anti-theft deterrent

A 30A deck inlet made of premium AISI 316 stainless steel, combining a sleek appearance with maximum IPX7 protection. The mirror-polished, spring-closing cap keeps water out of the connection even under heavy seas. This stainless inlet is ideal for luxury yachts and marine vessels where reliability, strength, and corrosion resistance are paramount.

• Stainless Steel Build: Body and cap crafted from marine-grade 316 stainless steel with a mirror finish. Highly resistant to corrosion in saltwater and extremely durable – retains its shine and structural integrity for years.
• High Waterproof Rating: IPX7 – fully waterproof against immersion. Precision rubber gaskets and the cap’s locking latch ensure no water penetrates inside when the lid is closed.
• 30A Capacity: Designed for 30A/220V shore power, with heavy-duty electrical pins (nickel/silver-plated) for reliable transfer of high currents without overheating. Conforms to standard dimensions to mate with corresponding 30A shore power plugs.
• Secure Installation: Mounts firmly to the deck; supplied with stainless steel hardware. Includes a rear plastic cover over the wire terminals to shield them from moisture and relieve strain on the cable.

A low-profile 30A deck inlet from the “New Edge” series, made of white ABS plastic, designed for modern boats. It offers IP56 protection against splashes and rain, and features a sleek flat cover with snap closure. This socket is compatible with both standard 30A plugs and 16A Marinco/Hubbell plugs, making it a versatile solution for various shore power systems.

• Sleek Design: The “New Edge” style is characterized by a low profile and elegant look. The white plastic flange sits flush on the deck with no protruding parts, reducing the risk of snagging lines or tripping.
• Universal Compatibility: The special construction allows the inlet to accept a 30A plug, and thanks to its adaptive opening – also a standard 16A (European/Marinco) plug. This means the boat can connect to a 16A supply with an appropriate cable without needing a separate inlet.
• IP56 Protection: The socket withstands strong water spray and seasplash. The snap-shut lid and internal gasket keep the electrical components dry during rainy weather or waves on deck (not fully submersible, but more than sufficient for above-water conditions).
• Easy Installation & Service: Installs quickly with the included screws; its dimensions match standard 30A cutouts. The inner module can be removed for access to the terminals, simplifying the wiring process. A built-in strain relief at the back secures the wires and prevents chafing or pull-out.

Robust marine-grade ON/OFF switch with protective flip-top cover. Rated 280 A continuous and 2,500 A instantaneous, designed for recessed 80 mm mounting and fast power disconnection.

A 30A “New Edge” deck inlet with a chrome-plated plastic cover for a stylish appearance. It combines the light weight of an ABS construction with a mirror chrome finish, providing IP56 protection against splashes. Compatible with both 30A and 16A (Marinco/Hubbell) plugs, it offers flexibility in connectivity. An ideal choice for boats that want style without compromising functionality.

• Sleek Aesthetics: The chromed cover and flange give a luxurious, metallic look resembling stainless steel, but on a lightweight plastic base. The inlet matches other chrome accents on deck and enhances the yacht’s overall appearance.
• Lightweight & Strong: The core is ABS plastic, which will not corrode. The chrome plating is UV-resistant and saltwater-resistant – it won’t peel or rust, maintaining its shine with proper care.
• Marine Protection: IP56 waterproofing shields the interior from rain and waves. The snap-close lid with gasket ensures the electrical pins stay dry in wet conditions (the inlet is not for submersion, but it is built to handle heavy spray).
• Flexible Use: Supports 30A connections for 220V shore power and allows the use of 16A plugs via a suitable adapter. This means that regardless of the power source type (standard European 16A or dedicated 30A), your boat can connect without hassle.

A waterproof female 32A shore power connector designed for cable mounting (boat-side end). It provides a secure IP67 connection between dock power and the boat’s inlet, thanks to a robust impact-resistant plastic body and a locking ring that secures it to the deck socket. This connector protects electrical connections from moisture and allows easy assembly or repair of 32A power cords.

• High Amperage: Rated for 32A at 220V AC – suitable for larger yachts and vessels that require more power than standard 16/30A systems. Capable of handling loads up to ~7 kW, ideal for running multiple AC units, electric stoves, water heaters, and other heavy onboard consumers.
• IP67 Waterproof: When properly mated and tightened, it provides complete water protection – withstands submersion in water up to 1 meter for 30 minutes. Rubber seals and the locking mechanism keep water off the contact surfaces even in driving rain or if the connector is briefly dropped overboard.
• Marine Durability: Housing made from tough engineering plastic, resistant to impacts, UV radiation, and extreme temperatures. The contact sleeves (female receptacles inside) are solid brass with anti-corrosion plating, ensuring reliable conductivity and many connect/disconnect cycles without wearing out.
• Easy Wiring: Designed for convenient cable attachment – the back unscrews to give access to screw terminals for live, neutral, and ground. It features an integrated cable gland with a silicone seal that grips the shore cable tightly (typically a 3x6mm² cable for 32A), preventing pull-out and sealing the entry against water and dust.

Allows you to connect your boat’s shore power cable to any standard 230V Schuko outlet by adapting it to a 16A marine connector. This compact and reliable adapter is perfect for use at home or docks that lack a dedicated marina outlet.

• Standard Schuko male plug to 16A industrial female coupler (blue CEE type)
• Rated 16A at 250V (~3.6 kW max load) – limited by the Schuko outlet capacity
• Durable, splash-resistant build (IP54) suitable for outdoor use
• Short flexible cable (~30 cm) for convenient use without excess slack

A specialty adapter that allows a 32A shore power plug from your boat to connect to a standard Schuko outlet. Ideal for temporary hookups or emergency power, this adapter gives you the flexibility to draw power from regular mains for your boat’s lower-power needs.

• Schuko plug (EU male) to 32A female coupling (industrial blue CEE)
• Supports up to 16A current (limited by the Schuko source) – max ~3.6 kW load
• Moisture-resistant build (IP55) – suitable for outdoor use and damp environments
• Short 30 cm adapter cable – easy to use, pack, and store on board

A premium SmartPlug inlet for mounting on your boat, providing maximum safety and reliability for your shore power connection. This female SmartPlug connector replaces the standard round inlet with an innovative design that eliminates overheating and makes hooking up effortless.

• Eliminates overheating – increased contact area plus a built-in thermostat that cuts power if temperature rises
• Easy to use – plugs straight in without twisting and locks automatically in place
• Multi-point locking – dual locking clips ensure a rock-solid connection that won’t wiggle loose
• Weather resistant – special gaskets keep moisture out (fully watertight construction for marine use)
• Available in two versions: 16A and 32A – to suit different boat sizes and power needs