Sonar, Navigation and Radio Equipment

The Raymarine P319 is a compact plastic thru-hull transducer for depth and temperature, offering 600W dual-frequency performance in a low-profile design. With an almost flush exterior (protrudes only 5 mm) and an internal tilt for up to 8° deadrise, the P319 provides reliable depth readings to around 365 m and fast water-temperature updates, all without compromising your boat’s speed or handling.

• Dual 50/200 kHz, 600W sonar: depth range up to ~1,200 ft (50 kHz) / 700 ft (200 kHz); narrow 11° beam @200 kHz for detail, wide 45° @50 kHz for depth penetration
• Low-profile flush mount: extends only ~5 mm outside the hull, minimal drag and no cavitation – excellent for high-speed and trailered boats
• Built-in temperature sensor: provides real-time accurate water temperature readings
• For fiberglass and metal hulls: plastic housing isolates from galvanic currents; intended for solid hulls (not cored) up to 5/8″ thickness
• 8-pin DSM connector included: plug-and-play with Raymarine CP370, legacy DSM300/30/250 modules and systems; adapter cables available for newer MFDs

Low-profile thru-hull depth transducer for reliable water depth readings in all conditions. Suitable for both power and sailboats, compatible with a range of Raymarine echo-sounder systems.

• Plastic housing for flush thru-hull installation with minimal drag
• 14 m cable length – ample for installation on larger vessels
• Compatible with Raymarine analog depth instruments (ST40, ST60+, i40, i50) via appropriate interface
• Measures depth only – ideal for integration with tri-data and multi-function displays

Compact thru-hull depth transducer suitable for small to mid-size boats. It features a short “Shorty” profile for minimal hull intrusion and reliable performance with Raymarine echo-sounders.

• Thru-hull mount – low-profile design reduces drag and noise
• P7 Shorty™ plastic housing – ideal for fiberglass and aluminum hulls
• 9 m cable – optimized length for smaller vessels and easy routing
• Compatible with Raymarine depth displays (ST40/i40, ST60+/i50, etc.)

Smart DST800 transducer combining depth, speed, and temperature in one unit. It outputs data via NMEA2000/SeaTalkNG, making it ideal for modern Raymarine marine electronics (i70, ST70, etc.).

• 3-in-1 sensor: measures depth, water speed, and temperature simultaneously
• Digital smart transducer: direct NMEA2000/SeaTalkNG output for easy integration
• Thru-hull mount (2” hole): robust plastic housing for fiberglass/aluminum hulls
• Compatibility: works with Raymarine i70, ST70, and other displays via network connection

DT800 0° smart depth and temperature transducer designed for flat hull installations (0° tilt). It provides an NMEA2000/SeatalkNG output for easy integration into Raymarine systems. An excellent choice for obtaining depth and water temperature data when a speed sensor isn’t required.

• Depth + temperature: dual-parameter sensor with high accuracy
• 0° tilt element: optimized for flat or minimal-deadrise hulls
• Digital smart output: plugs directly into network (supports Raymarine i70/ST70, MFDs, etc.)
• Thru-hull installation: plastic housing, corrosion-proof, fits 2” hole

High-performance B744V bronze “triducer” for thru-hull mounting, providing depth, speed, and temperature readings. Suitable for boats and yachts requiring a rugged, high-performance sensor. A 14 m cable allows connection to sonar modules and displays over long runs.

• Three functions in one: depth, boat speed, and water temperature
• Bronze housing: durable and wear-resistant, ideal for wooden and fiberglass hulls
• Thru-hull mount (2” hole): reliable performance at high speeds and offshore conditions
• Long cable (14 m): supports installation on larger vessels and hookup to sonar modules (CP370, iTC-5, etc.)

B744VL – the long-stem version of the popular bronze triducer. Intended for thicker hulls or deep-V installations, this transducer provides depth, speed, and temperature. It delivers rugged reliability and comes with a 14 m cable for flexible installation on larger vessels.

• Long stem design: suitable for thick hulls or deep mounting locations
• 3-in-1 readings: depth, water speed, and sea temperature
• Bronze thru-hull: high durability, ideal for wood/fiberglass hulls
• Compatible with Raymarine sonar: works with 600 W fishfinders, iTC-5, CP370, etc.

Low-profile ST800/P120 thru-hull log transducer measuring boat speed through water and temperature. Installs through the hull with a plastic (urethane) housing suitable for aluminum and fiberglass boats. Includes a 14 m cable and is compatible with Raymarine speed/temperature instruments (ST40/i40, ST60+/i50, Tridata).

• Measures speed & temperature: built-in paddlewheel and temp sensor
• Flush installation: minimal drag, easily removable for cleaning
• Urethane material: no corrosion, suitable for various hull types
• Wide compatibility: connectable to ST40/i40, ST60+/i50, iTC-5 (SeatalkNG)

Masthead wind vane Short Arm with ~30 cm arm and 30 m cable included. Designed for Raymarine wind systems (analog ST60/ST60+ and digital i60 via iTC-5). Delivers precise wind direction and speed measurement for reliable sailing navigation.

• Short arm ~0.3 m: lightweight and balanced – minimal masthead vibration
• Dual function: measures wind angle and wind speed (anemometer)
• 30 m cable included: enough length for all yacht sizes (masthead to cockpit)
• Compatibility: connects directly to ST60/ST60+ Wind, or to i60 via ITC-5 (SeaTalkNG converter)

• Masthead wind transducer (anemometer) with extended 600mm vane arm for precise wind speed and direction measurements.
• Improves accuracy on sailboats by positioning the sensor further above sails and turbulence, minimizing interference.
• Includes a 50m cable and mounting base for easy installation atop the mast.
• Compatible with Raymarine i60 Wind instrument, iTC-5 converter module, and ST60/ST60+ series instruments.