Shore Power

A 30A deck inlet made of premium AISI 316 stainless steel, combining a sleek appearance with maximum IPX7 protection. The mirror-polished, spring-closing cap keeps water out of the connection even under heavy seas. This stainless inlet is ideal for luxury yachts and marine vessels where reliability, strength, and corrosion resistance are paramount.

• Stainless Steel Build: Body and cap crafted from marine-grade 316 stainless steel with a mirror finish. Highly resistant to corrosion in saltwater and extremely durable – retains its shine and structural integrity for years.
• High Waterproof Rating: IPX7 – fully waterproof against immersion. Precision rubber gaskets and the cap’s locking latch ensure no water penetrates inside when the lid is closed.
• 30A Capacity: Designed for 30A/220V shore power, with heavy-duty electrical pins (nickel/silver-plated) for reliable transfer of high currents without overheating. Conforms to standard dimensions to mate with corresponding 30A shore power plugs.
• Secure Installation: Mounts firmly to the deck; supplied with stainless steel hardware. Includes a rear plastic cover over the wire terminals to shield them from moisture and relieve strain on the cable.

A low-profile 30A deck inlet from the “New Edge” series, made of white ABS plastic, designed for modern boats. It offers IP56 protection against splashes and rain, and features a sleek flat cover with snap closure. This socket is compatible with both standard 30A plugs and 16A Marinco/Hubbell plugs, making it a versatile solution for various shore power systems.

• Sleek Design: The “New Edge” style is characterized by a low profile and elegant look. The white plastic flange sits flush on the deck with no protruding parts, reducing the risk of snagging lines or tripping.
• Universal Compatibility: The special construction allows the inlet to accept a 30A plug, and thanks to its adaptive opening – also a standard 16A (European/Marinco) plug. This means the boat can connect to a 16A supply with an appropriate cable without needing a separate inlet.
• IP56 Protection: The socket withstands strong water spray and seasplash. The snap-shut lid and internal gasket keep the electrical components dry during rainy weather or waves on deck (not fully submersible, but more than sufficient for above-water conditions).
• Easy Installation & Service: Installs quickly with the included screws; its dimensions match standard 30A cutouts. The inner module can be removed for access to the terminals, simplifying the wiring process. A built-in strain relief at the back secures the wires and prevents chafing or pull-out.

A 30A “New Edge” deck inlet with a chrome-plated plastic cover for a stylish appearance. It combines the light weight of an ABS construction with a mirror chrome finish, providing IP56 protection against splashes. Compatible with both 30A and 16A (Marinco/Hubbell) plugs, it offers flexibility in connectivity. An ideal choice for boats that want style without compromising functionality.

• Sleek Aesthetics: The chromed cover and flange give a luxurious, metallic look resembling stainless steel, but on a lightweight plastic base. The inlet matches other chrome accents on deck and enhances the yacht’s overall appearance.
• Lightweight & Strong: The core is ABS plastic, which will not corrode. The chrome plating is UV-resistant and saltwater-resistant – it won’t peel or rust, maintaining its shine with proper care.
• Marine Protection: IP56 waterproofing shields the interior from rain and waves. The snap-close lid with gasket ensures the electrical pins stay dry in wet conditions (the inlet is not for submersion, but it is built to handle heavy spray).
• Flexible Use: Supports 30A connections for 220V shore power and allows the use of 16A plugs via a suitable adapter. This means that regardless of the power source type (standard European 16A or dedicated 30A), your boat can connect without hassle.

A waterproof female 32A shore power connector designed for cable mounting (boat-side end). It provides a secure IP67 connection between dock power and the boat’s inlet, thanks to a robust impact-resistant plastic body and a locking ring that secures it to the deck socket. This connector protects electrical connections from moisture and allows easy assembly or repair of 32A power cords.

• High Amperage: Rated for 32A at 220V AC – suitable for larger yachts and vessels that require more power than standard 16/30A systems. Capable of handling loads up to ~7 kW, ideal for running multiple AC units, electric stoves, water heaters, and other heavy onboard consumers.
• IP67 Waterproof: When properly mated and tightened, it provides complete water protection – withstands submersion in water up to 1 meter for 30 minutes. Rubber seals and the locking mechanism keep water off the contact surfaces even in driving rain or if the connector is briefly dropped overboard.
• Marine Durability: Housing made from tough engineering plastic, resistant to impacts, UV radiation, and extreme temperatures. The contact sleeves (female receptacles inside) are solid brass with anti-corrosion plating, ensuring reliable conductivity and many connect/disconnect cycles without wearing out.
• Easy Wiring: Designed for convenient cable attachment – the back unscrews to give access to screw terminals for live, neutral, and ground. It features an integrated cable gland with a silicone seal that grips the shore cable tightly (typically a 3x6mm² cable for 32A), preventing pull-out and sealing the entry against water and dust.

Allows you to connect your boat’s shore power cable to any standard 230V Schuko outlet by adapting it to a 16A marine connector. This compact and reliable adapter is perfect for use at home or docks that lack a dedicated marina outlet.

• Standard Schuko male plug to 16A industrial female coupler (blue CEE type)
• Rated 16A at 250V (~3.6 kW max load) – limited by the Schuko outlet capacity
• Durable, splash-resistant build (IP54) suitable for outdoor use
• Short flexible cable (~30 cm) for convenient use without excess slack

A specialty adapter that allows a 32A shore power plug from your boat to connect to a standard Schuko outlet. Ideal for temporary hookups or emergency power, this adapter gives you the flexibility to draw power from regular mains for your boat’s lower-power needs.

• Schuko plug (EU male) to 32A female coupling (industrial blue CEE)
• Supports up to 16A current (limited by the Schuko source) – max ~3.6 kW load
• Moisture-resistant build (IP55) – suitable for outdoor use and damp environments
• Short 30 cm adapter cable – easy to use, pack, and store on board

A premium SmartPlug inlet for mounting on your boat, providing maximum safety and reliability for your shore power connection. This female SmartPlug connector replaces the standard round inlet with an innovative design that eliminates overheating and makes hooking up effortless.

• Eliminates overheating – increased contact area plus a built-in thermostat that cuts power if temperature rises
• Easy to use – plugs straight in without twisting and locks automatically in place
• Multi-point locking – dual locking clips ensure a rock-solid connection that won’t wiggle loose
• Weather resistant – special gaskets keep moisture out (fully watertight construction for marine use)
• Available in two versions: 16A and 32A – to suit different boat sizes and power needs

SmartPlug male plug for your shore power cord – designed to replace the standard end of the cable with a safer, more reliable SmartPlug connection. It ensures a secure, cool-running link with no arcing or overheating, fully compatible with your boat’s SmartPlug inlet.

• SmartPlug connector for cable installation (male plug) – available for 16A or 32A shore cords
• Built with marine-grade materials: 316 stainless steel components and impact-resistant polymer
• Runs cool – robust flat blades with a large contact area improve conductivity and eliminate heat buildup
• Locks in automatically when plugged in – won’t unplug even if the cord is tugged or moved
• Splash-proof and saltwater-resistant (IP54) – engineered for outdoor marine use with no corrosion issues

A universal adapter that lets you plug a device with a standard Schuko plug into a 16A industrial (blue) outlet at a marina, campsite, or generator. This 30 cm cable with a female Schuko socket and male 16A CEE plug is designed for safe outdoor use.

• Female Schuko socket (with cover) to male 3-pin 16A plug (CEE, 230V)
• ~0.3 m length for convenience and minimal slack
• Rated up to 16A / 250V (around 3.6 kW max)
• IP64 protection – shielded from dust and splashing water
• Perfect for camping, RVs, boats – powering household devices from a shore power outlet

A ready-to-use shore power extension cable equipped with male and female CEE connectors. Available in 15 or 20 meter lengths and in 16A or 32A capacity to meet the needs of different boats and distances to the dock.

• Complete cable with 3-pin plug (male) and 3-pin coupling (female) – standard blue CEE format
• Choice of length: 15 m or 20 m for optimal reach to the power source
• Available ratings: 16A (3 x 2.5 mm² conductors) or 32A (3 x 6 mm² conductors) for different power requirements
• Durable rubber cable, flexible and resistant to UV rays, oil, and saltwater
• Ready to use – simply plug the male end into the shore outlet and the female end into your boat’s inlet