Cleaning, preparation and application supplies

• C3 SHAMPOO WITH WAX is a shampoo with wax for cleaning and protecting gelcoat and painted surfaces. High cleaning power and finish in gloss.
• Shake well before use.  Let a small amount dissolve in warm water and clean the vessel. After treatment, always rinse with fresh water. Polish with a dry, soft cloth to retrieve a high gloss shine.

Volume 250 ml

C2 CONCENTRATE CLEANER is very powerful water soluble and biodegradable cleaner for quick and efficient removal of oil, grease, scale, soot, nicotine etc. Great as a professional cleaner for fenders, tarpaulins, poles and aluminum ship components and for the removal of hydraulic oil .

Thin with water. For normal dirt add 1 part of C2 on 10 parts of water. For heavy dirt add 1 part C2 on 5 parts of water. Can be diluted with hot and cold water. Use cloth or soft brush. After treatment, always rinse with plenty of water.

Sea-Line® C2 CONCENTRATE CLEANER is a concentrated product for cleaning GPR off lingering contaminants. It is a very powerful biodegradable, water soluble cleaner for quick and efficient removal of contaminants from such surfaces as:
• GRP laminate
• varnished surfaces
• aluminium (masts, fittings)
• PCV (pontoons).
• rubber (reflectors, rubbing strakes, gaskets).
• textiles (tents, covers, tarpaulins).

The modern formula of Sea-Line® C2 Concentrate Cleaner combined with a possibility of diluting the product, depending on the degree of contamination, makes it ideal for removing:
• grease
• oils (also hydraulic ones),
• soot
• discolorations and damp patches caused by rainfalls
• other contaminants difficult to remove

Volume: 500 ml

• C1  BOTTOM CLEANER (SHELL AND FOULING REMOVER) is a powerful, effective formula to rapidly remove barnacles from boat hull.
• Apply in small quantity on the surface and leave for 5 to 15 minutes. Then remove the dirt and treated with a fresh water under pressure or use a sponge kitchen with plenty of rinsing with water. In cases of very large lichen can re-apply formulation and remove it after approximately 10 minutes.

 NOTICE: Do not use the product if the surface is painted with 1-component paint.

Volume: 500 ml

• Cleaner – recommended to degrease the surface before painting.
• Silicone remover is the product used for surface cleaning before lacquering. The silicone, wax or grease soil is very dangerous for the good lacquering effect. The silicone remover may be used for metal or plastic surfaces.
• Pack: 1l