Electrical Switches and Buttons

EN: Heavy-duty marine toggle switch with a brass body and chrome-plated lever, designed for various onboard applications. Features silver-plated contacts for reliable conductivity and a long threaded neck for easy panel mounting. Available in multiple versions labeled for specific functions (navigation lights, bilge pump, wiper, etc.), each with intuitive engraved symbols on the knob.

High-quality IP56 waterproof rocker switch for marine panels, featuring dual LED indicators (one backlight for the symbol and one active status LED). Fits standard rectangular cutouts (21.5×36.8 mm) and handles up to 20A (12V) / 10A (24V). Available in single-pole and double-pole versions with various configurations: ON-OFF, momentary (spring-return), and three-position switches for controlling lights, pumps, trim tabs, and other onboard systems.

Rugged anti-vandal style push-button switch made of stainless steel, featuring an illuminated LED ring indicator. Rated for high current (20A @ 12V or 10A @ 24V), this IP67 waterproof switch is ideal for exterior marine use. Available with red or blue illumination and in latching ON/OFF or momentary (spring-return) configurations, it provides reliable control for horn, lighting, starter, or other onboard circuits while adding a modern look.

A compact thermal circuit breaker with push-button reset, designed to protect your boat’s electrical circuits from overloads. Operates on 12/24V DC (max 32V) and available in amperage ratings from 3A up to 25A. Features an easy manual reset button that pops out when tripped – simply push it back in to restore power once the fault is cleared. Moisture-resistant design suitable for marine use, ideal for replacing fuse holders in control panels for convenient, reusable protection.

A single-pole marine toggle switch designed for Blue Sea Systems’ WeatherDeck panels and similar applications. Features a nickel-plated brass construction with a chrome-plated toggle. Available in 2-position (ON-OFF or momentary ON) and 3-position configurations, with both maintained and momentary actions. Compact size (fits 28.8 x 17 mm slot) and sealed for moisture protection, this switch reliably controls bilge pumps, lights, or other circuits on your boat’s control panel.

A small ON/OFF rocker switch module with built-in LED illumination, designed as a replacement for boat switch panels. Runs on 12V and lights up when the switch is on, providing a clear status indication. This switch snaps into compatible panel frames (or mounts via clips) and is commonly used in accessory or dash panels for controlling devices like lights or pumps. Rated around 10A, it’s an ideal spare part to restore functionality to worn-out switches on your control panel.

Heavy‑duty 22 mm brass push‑button switch, sealed with rubber, waterproof, ideal for marine use.

Enhance your vessel’s control panel with this marine-grade push‑button switch. It features a chrome-plated brass housing and a durable rubber seal, designed to withstand salt spray and moisture. With a panel cut-out diameter of 22 mm and an external bezel diameter of 30 mm, it installs easily via threaded bushing and nut. The momentary push‑button delivers reliable performance for horn, ignition, kill switch, or emergency functions. Robust waterproofing ensures durable operation in harsh environments—essential for any boat helm.

Durable rubber seal cap for marine-grade switches, available in Ø 10mm and Ø 12mm sizes to prevent water ingress.

Protect your marine switch panels with Eval’s waterproof seal caps (code 01372). These robust rubber caps snugly fit switch shafts of Ø 10 mm (01372‑10) and Ø 12 mm (01372‑12), preventing water, dust, and salt spray from entering the control housing. Made from durable, UV-resistant rubber, they are essential in maintaining IP integrity of your marine electrical systems. Easy to install—just push over the switch shaft—and ideal for helms, outdoor instrument panels, and exposed switch arrays.

Rugged waterproof brass toggle switch with 3‑position On‑Off‑On, rated 15 A/12–24 V DC for marine applications.

Enhance your boat’s electrical reliability with this heavy‑duty waterproof toggle switch (code 01390). Made from chrome-plated brass, it features a secure panel-mount with ½″ threaded bushing, providing a firm toggle action in rough sea conditions. Rated at 125 VAC–15 A, 250 VAC–10 A, 12 V DC–15 A, and 24 V DC–10 A, it comfortably handles lighting, pumps, trim tabs, horn, and auxiliary systems. The 3-position On‑Off‑On configuration simplifies dual-circuit control. Sealed design resists salt spray and moisture—ideal for helm panels and exposed environments. Easy to install with two screw terminals. A coastal-grade switch built to last.

Upgrade your vessel with this full-metal marine-grade reset switch (Eval code 03269‑4). Rated at 125 VAC–15 A, 250 VAC–10 A, 12 VDC–15 A and 24 VDC–10 A, it ensures reliability across various voltage systems. The rugged design features a 3-position OFF‑ON‑OFF toggle action, offering intuitive control and audible feedback—even in rough seas. Built for easy installation on 12 mm panels, it’s the reliable choice for navigation lights, pumps, radios, bilge systems and other vital onboard circuits.