Drain Plugs, Plugs

Keep your boat dry and safe with this high-visibility orange plastic bailer. Made from durable, impact-resistant plastic, it quickly removes unwanted water from your vessel during emergencies or after rain. Its large, lightweight design with an ergonomic handle and wide mouth ensures maximum bailing capacity with each scoop, making it an essential safety tool for any small boat.

• Material: High-quality, impact-resistant polypropylene plastic.
• High Visibility: Bright orange color for easy spotting in low-visibility conditions.
• Ergonomic Design: Comfortable handle and wide opening for efficient water removal
• Capacity: Approximately 1 liter volume for quick bailing of water.
• Versatile Use: Suitable for lifeboats, life rafts, dinghies, and other small boats as a manual dewatering device.

Plastic boat drain plug with a Ø50 mm drain diameter, equipped with an integrated hasp-type locking mechanism for a secure seal. Made of high-quality UV-resistant polymer that won’t corrode in saltwater. Ideal for installation on the transom or bottom of small to medium boats (including RIBs and jet skis), it allows easy drainage of accumulated water when the boat is on land.

• Ø50 mm opening – a standard drain size for many boats and personal watercraft
• Locking cap design – features a latch mechanism to prevent accidental opening while underway
• Durable plastic construction – non-corrosive, UV-stable, and impact-resistant for long service life
• Easy to use – quick to plug in or remove; locking tab keeps the plug attached so it won’t get lost
• Wide application – suitable as a transom drain plug, for self-bailing cockpit drains, deck drains, and more

Set of 10 wooden conical plugs designed to stop emergency leaks by plugging holes in a boat’s hull or plumbing. The plugs come in assorted diameters (approximately 5 mm up to 45 mm), covering a wide range of hole sizes. When wet, the wooden bungs swell to form an even tighter seal. An essential component of every vessel’s damage control kit.

• 10 wooden plugs in various sizes – seal holes roughly from Ø5 mm to Ø45 mm
• Tapered shape – can be driven into different-sized openings, conforming for a tight fit
• Natural swelling when wet – wood expands upon soaking, increasing the effectiveness of the seal
• Emergency leak stopper – blocks incoming water through broken fittings, burst hoses, or hull breaches
• Easy to use – pick the right-sized plug and hammer it firmly into the leaking hole (or push by hand if necessary)

Oval plastic drain plug with flange base for fixed installation on a boat. Features a 25 mm inner drain diameter and comes in two body length options – short (~27 mm) and long (~67 mm) – to fit different transom or hull thicknesses. A separate spare inner plug (male insert) is included for replacement in case of loss or wear. Made of white ABS material for a watertight seal and durability. Ideal for transom drain points – allows quick draining by removing the plug.

• Oval base with screw holes – easy to mount on transom/deck; low-profile flange sits flush against the hull
• 25 mm inner diameter – standard drain size (can attach to 25 mm hose if needed for draining)
• Two length options: ~27 mm (for thin walls) and ~67 mm (for thick walls) – choose according to your boat’s hull/transom thickness
• Spare plug (code 00923-2) – an additional inner “stopper” insert for replacement; prevents downtime if the original plug is lost
• Secure seal – equipped with a rubber O-ring for watertight closure; ABS plastic is UV-resistant and impact-resistant

Our plastic boat drain plug with base is the ideal solution for efficiently draining water from your boat’s hull, preventing unwanted accumulation. Made of high-quality nylon plastic, it offers long-lasting durability in marine environments and a reliable watertight seal. Perfect for transom installation on small to mid-sized vessels.

• Watertight design with O-ring seal – prevents leaks and water ingress.
• Standard Ø23 mm size fits most boats around 3–5 m (10–16 ft) in length.
• Sturdy base flange made of UV-resistant plastic (nylon) for secure hull mounting.
• Integrated hose connection on inner side to channel water directly overboard.
• Available in white or black to match your boat; spare insert plug available separately for backup.

A plastic drain plug with an attached locking cap, designed for larger hull openings (Ø34 mm). This plug allows rapid and safe drainage of water, and the twist-lock cap stays tethered so it won’t get lost, ensuring a watertight closure when sealed. The durable plastic construction resists saltwater and UV degradation, making it a reliable choice for bigger boats.

• Large Ø34 mm diameter – enables faster drainage, suitable for medium and larger boats (~5–7 m length).
• Built-in screw-on cap with locking mechanism – cap remains attached to the assembly to prevent accidental loss.
• Made of impact-resistant, UV-stabilized plastic – engineered for the harsh marine environment.
• Easy transom or hull installation – includes threaded body and gaskets for a leak-proof fit.
• Secure tool-free closure – simply twist the cap by hand to seal the drain and prevent any leaks.

A compact Ø23 mm plastic drain plug with a locking cap, ideal for small boats and hulls with smaller drain openings. It provides reliable water drainage, with the cap staying attached to the plug assembly to prevent loss, and securely sealing the opening when twisted shut. The material is resistant to saltwater and sun exposure, ensuring longevity in marine conditions.

• Ø23 mm diameter – fits standard drain holes on small boats, RIBs, and jet skis (~3–5 m length).
• Tethered screw cap – no risk of dropping or losing the plug during drainage.
• Premium UV-resistant plastic – avoids corrosion and cracking over time in harsh weather.
• Transom or bottom installation – simple setup with gaskets for a tight fit to the hull.
• Quick hand-operated open/close – provides a leak-proof seal to prevent water ingress, no tools needed.

A versatile expanding drain plug available in three sizes – Ø21, Ø23, and Ø24 mm. This type of plug inserts directly into the drain hole and tightens via a “butterfly” wing-head screw that expands a rubber stopper for a tight fit. It features a stainless steel screw and neoprene rubber, ensuring a secure seal and durability. Perfect as a spare or primary drain plug for a variety of watercraft.

• Simple and effective design – insert the plug and tighten the wing screw in seconds, no tools needed.
• Neoprene rubber body expands upon tightening, completely stopping any leaks.
• Comes in Ø21, Ø23, and Ø24 mm – choose the size that matches your boat’s drain hole diameter.
• Stainless steel hardware (screw/washer) – corrosion-resistant for long life in saltwater use.
• Suitable for small boats, fishing boats, yachts, jet skis, etc. – easily removed and reinserted as needed.

A premium stainless steel drain plug Ø25.4 mm (1 inch) for boats, offering maximum corrosion resistance and a reliable seal. Made from polished marine-grade stainless metal, this plug assembly is designed for transom mounting with a flange and screws. A rubber gasket prevents leaks, and the robust construction withstands heavy use in saltwater.

• All AISI 316 stainless steel – resists saltwater, rust, and impact.
• Standard Ø25.4 mm (1″) opening – a commonly used size on medium and large boats.
• Includes flange base and threaded plug – easy hull installation and secure screw-in/out operation.
• Durable rubber O-ring gasket – ensures a completely watertight seal when closed.
• Ideal for powerboats, sailboats, and RIBs – especially suited for long-term water exposure and harsh marine conditions.

A spare white Ø23 mm drain plug for boat drainage systems – perfect for replacing a lost or worn insert. This male plug is compatible with standard plastic bases (e.g., our model code 00922) and screws in to ensure a watertight closure. It’s made of durable plastic and includes an O-ring for a tight seal.

• Compatible Ø23 mm replacement plug – fits most drain openings of this size and their bases.
• White color, premium nylon construction – UV-stable, saltwater-resistant material identical to original plugs.
• Built-in rubber O-ring – ensures waterproof performance when the plug is tightened.
• Easy to replace – simply screw the spare plug into the drain base in place of the old one, no tools needed.
• Must-have spare – every boat owner should keep at least one extra drain plug on board for emergencies.