Eyelets, Fittings, and Hooks

High-quality marine snap fasteners (“press studs”) made of stainless steel, perfect for boat covers, bimini canvas, and protective tarpaulins. This set includes all the components needed for a secure fastening system – the top cap with spring socket, the base stud for mounting, and a backing plate for fabric installation. Designed to resist corrosion and provide a firm hold, these snaps keep your cover tightly fastened even in strong winds or boat motion.

• Material: cap made of AISI 316 stainless steel with brass spring insert – superior rust resistance in marine conditions
• 17 mm head diameter – standard size fits most marine canvas, sprayhoods, and upholstery applications
• Set includes: female snap (A+B parts) for fabric, male stud (C part) for hard surfaces, and a backing counter flange (D part) for attaching the stud through fabric
• Positive “click” locking action – stays securely fastened and will not pop open due to wind load or vibration
• UV-resistant and weatherproof – built to last outdoors in sun and saltwater environments without degradation

A small specialized wrench tool designed for quickly tightening and loosening marine fasteners and turn-buttons on your boat. Made of nickel-plated brass for corrosion resistance, this key fits common canopy twist-lock fasteners, “common-sense” turn locks, and other small screw heads found on boat covers. It enables you to securely fasten or release canvas fittings without damaging the fabric or hurting your fingers.

• Custom shape for marine turn-button fasteners and screw-in snap heads on boat covers and awnings
• Compact size and ergonomic grip – easy to handle even in tight spaces on deck
• Constructed from chromed brass – will not rust and withstands the marine environment
• Prevents scratching of hardware – precisely fits the slot of the fastener to avoid slips
• Simple to use: allows quick locking/unlocking of canvas panels, straps, and covers, even one-handed

A chromed brass male clip/stud designed to be attached to canvas, tarpaulin or boat cover fabric. This male fastener part installs securely onto the material and provides an attachment point for a corresponding female clip or deck fitting. Made of solid brass with a shiny chrome finish for an elegant look and corrosion protection, it is compatible with common canopy and cover fastening systems.

• Male clip/stud that mounts directly on fabric (via crimping or riveting through the canvas)
• All-brass construction with chrome plating – rustproof and built for harsh marine conditions
• Pairs with code 03974 (female clip) – together they form a secure canvas-to-canvas connection
• Smooth rounded head – prevents chafing of fabric and gives a professional finished appearance
• Ideal for bimini tops, boat covers, side curtains, and other marine canvas attachments

A male clip with a 2-hole base made of chromed brass, designed for mounting on a solid surface (deck, gunwale, frame). This “foot” style fastener has two screw holes for firmly fixing it to the boat, and a protruding stud onto which a female canvas clip attaches. It provides a strong and stable anchor point for covers, ensuring canvas is held taut against the boat’s structure.

• Base plate with two 5 mm screw holes – standard spacing for easy installation
• Brass construction with chrome finish – weather-resistant for long-term outdoor use
• Mates with clip 03974 (female part) – creates a secure “canvas-to-boat” connection
• Low-profile, rounded design – won’t snag lines and is foot-friendly when stepped on
• Ideal for securing bimini tops, console covers, engine covers, etc., directly to the boat

A chromed brass turn-button fastener for canopies, consisting of a base and a rotating tab, which acts as a locking mechanism for canvas. This “common sense” fastener secures the canvas with a quarter-turn – firmly locking a cover in place and preventing accidental release. It mounts with screws to a solid surface and pairs with a grommet or eyelet on the fabric.

• Classic marine twist-lock mechanism – rotate 90° to lock or unlock the canvas
• Made of chrome-plated brass – corrosion-resistant with a strong spring tongue
• Two mounting holes for screws – easy to install on wood, fiberglass, or metal surfaces
• Compatible with snap eyelet 03974 – the canvas stud/grommet engages under the turn tab
• Ideal for canvas doors, hatches, covers – where a more robust latch is needed than a simple snap

A female canopy clip (socket) made of nickel-plated brass, intended to be attached to canvas. This piece acts as the receiving end of the fastening system – it connects with a male clip or turn-button on the boat. Durable and corrosion-resistant, it holds the fabric securely without tearing or distorting it, even with repeated use.

• Solid brass with nickel plating – excellent resistance to rust and wear
• Sized to fit clips 03997, 03977 and turn fastener 03975 – universally compatible
• Installs on fabric by crimping/riveting – forms a smooth grommet that won’t damage the material
• Strong spring retention – snaps tightly and won’t come undone unintentionally
• Ideal for all types of covers, side curtains, biminis – a standard component for canvas fastening or repairs

Male snap fastener with screw base in stainless steel, designed to secure canvas covers, boat canopies, and cushions to hard surfaces on your boat. Comes in two screw length options (short 15mm and long 25mm under head) to suit different material thicknesses:

• Marine-grade stainless steel – corrosion-resistant in saltwater; ideal for decks, gunwales, and cockpit installations.
• Standard 15mm snap head – mates with all standard female snap fasteners on canvas and covers (snaps on tightly and securely).
• Easy installation – simply pre-drill a small pilot hole and screw in; the wide flange under the head ensures firm grip on the fabric piece.
• Two screw lengths – 15mm length (code 00749-9) for thin substrates or sheet metal, 25mm length (code 00749-17) for thicker bases or wood backing.
• Versatile use – perfect for fastening all kinds of covers: boat tarpaulins, dodgers, bimini tops, seat covers, etc., wherever a strong snap connection is needed.

High-quality snap cap top (Ø15 mm diameter) made of durable plastic, available in multiple colors. Designed to attach to the canvas of covers, canopies, cushions, etc., providing an attractive finish and corrosion-proof performance:

• Tough plastic material – will not rust or corrode, won’t scratch paint; UV-stable colors (white, grey, blue) to match your canvas fabric.
• Standard 15mm size – fits standard snap fastener bases; easily snaps onto the male stud (screw or eyelet).
• Easy installation with snap tool – the cap joins with its matching socket via crimping or pressing; creates a secure attachment to the fabric.
• Decorative & functional – smooth colored cap conceals the metal snap and gives a finished look to your cover; no sharp edges exposed.
• Weather-resistant – plastic withstands sun exposure and saltwater without cracking, perfect for outdoor marine use.

Universal plastic snap-on button designed to attach to 19mm (~3/4") tubing. This piece allows easy fastening of canvas covers and fabrics to bimini or canopy frames without drilling. Available in black or white:

• Clip-on design – plastic base snaps securely around a Ø19mm tube (standard bimini/canopy frame size).
• Built-in snap stud – features an integrated male snap stud (post) for a standard 15mm canvas fastener, onto which the cover can snap.
• No drilling needed – quick way to attach canvas to frame: clip it to the tube at desired spot to hold your cover taut.
• Durable & flexible material – made of UV-resistant engineering plastic that can flex open/closed repeatedly without breaking; stands up to saltwater.
• Two colors – available in neutral white or black to blend with your frame or canvas; low-profile look that doesn’t mar the boat’s appearance.

The plastic strap bridge is a strong, durable loop designed for securing webbing straps to boat covers and canopies. Made of UV-resistant nylon, it won’t corrode and withstands marine conditions. It comes in two sizes to fit different strap widths, providing a secure anchor point for cover tie-downs during transport or storage.

• Material: High-strength plastic (nylon) construction, UV-stable and saltwater-proof
• Sizes: Small bridge (27 mm inner width) fits straps up to ~25 mm; Large bridge (40 mm inner width) fits straps ~40 mm wide
• Installation: Easily mounts with screws or rivets to the boat hull, frame, or canvas as needed
• Use Cases: Ideal for boat canopies, bimini tops, covers, and cargo straps – keeps webbing tight and in place
• Advantages: Will not rust, lightweight with smooth edges (prevents strap chafe and wear)