Electrical Equipment

A heavy-duty master battery disconnect switch designed to cut off your boat’s power supply for safety or storage. It features a removable red key that prevents unauthorized engine starts and acts as an anti-theft measure. A protective cover is included to seal the switch opening when the key is removed, keeping moisture and dirt out. Rated for up to 200A continuous (300A peak), this battery switch is ideal for medium to large vessels.

• Rated current: 200A continuous (up to 300A briefly) – handles engine starter loads with ease
• Bright red removable key – clearly indicates when the circuit is off; can be taken out to prevent accidental or unauthorized reconnection
• Durable plastic housing (impact and corrosion-resistant) with internal copper contacts for minimal voltage drop
• Protective rubber cover to shield the keyhole when the key is removed – prevents water, dust ingress and corrosion of the mechanism
• Easy installation – compact size for dash or battery box mounting; standard M10 terminals accommodate heavy-gauge battery cables

A professional 6-switch panel with a stainless steel face for managing multiple onboard systems. It combines high load capacity with versatility – the 6S variant includes a momentary (ON)-OFF horn button. All switches feature bright LED backlighting for night operation, and the panel is built for rough marine conditions with IP65 front protection. Ideal for yachts and boats with extensive equipment.

• 6 marine-grade switches (5 x ON-OFF with blue LEDs + 1 x momentary (ON)-OFF with red LED on 6S model)
• Polished stainless steel AISI 316 front panel – maximum resistance to saltwater and an elegant finish
• Sealed against spray and rain (rubber gaskets protect switches and fuses from water ingress)
• Pre-wired for convenience – includes common ground bus and 15A blade fuses for each circuit
• Designed for 12V/24V systems, suitable for controlling lights, navigation gear, pumps, instruments, etc., on medium and large boats

Durable plastic battery box that shields your boat’s battery from water, impact, and acid leaks. Small standard size suitable for smaller batteries. Includes a secure strap-down lid and cable ports.

• Dimensions (ext.): ~190 x 270 x 200 mm – compact model fits 60–80 Ah batteries (typical starter battery size)
• Material: Impact-resistant polypropylene plastic (will not corrode, UV-stable and fuel-resistant)
• Lid Design: Tight-fitting cover with a securing nylon strap and buckle; integrated cable pass-through holes allow connections without removing the lid
• Purpose: Prevents acid spills and short-circuits; keeps the battery stable during waves and vibrations; ideal for small boats, RIBs, RVs, or solar setups
• Installation: Easy to fix in place with the included strap and mounting brackets (can be fastened to deck to prevent sliding in motion)

8-way terminal block for boats and RVs, made of durable carbon-plastic. Enables secure connection of multiple electrical wires and distribution of power:

• 8 connection points – ideal for up to 8 separate circuits or wires
• Carbon-plastic base – resists vibration, saltwater, and high temperatures
• Compact size 38 x 152 mm – fits easily into an electrical panel or compartment
• High current rating (up to 60A) – suitable for 12V/24V onboard systems (up to 32V DC)
• Reliable screw terminals – provide tight clamping and uninterrupted contact

High-performance 360° LED anchor/navigation light with a retractable pole and base, designed for boats up to 20 m in length. This all-round white light offers exceptional versatility and low power consumption, combining durability with convenient operation:

• 360° all-round white LED light, high-intensity and visible at long range – ideal for night anchoring and navigation, keeping your vessel safe and compliant.
• Removable “plug-in” pole design – the light mounts on a quick-connect base, allowing you to easily detach the pole when not needed (for example, during daytime or trailering).
• Available in two pole heights: 60 cm for smaller vessels or elevated mounting points, and 100 cm for larger boats or when extra height is required to clear cabins, biminis, or other obstructions.
• Offered with a black, white, or polished stainless steel base – choose the style that suits your boat. All versions feature UV-resistant polymer and stainless steel components for maximum durability in marine environments.
• LED bulb 12/24V (1.7 W) is included – provides bright illumination with minimal battery draw and extremely long service life (no frequent bulb replacements needed).
• Fully COLREG72-compliant, with RINA/NMMA type-approval for vessels under 20 m – ensures your boat’s lighting meets international standards for visibility and safety at sea.

The Automatic Charging Relay (Voltage Sensitive Relay - VSR) intelligently connects two battery banks during charging and isolates them when charging stops, ensuring your starting battery is always topped up. Ideal for boats with dual battery systems, it prevents dead batteries and the risk of getting stranded. This compact and robust unit is fully waterproof and ensures safe, efficient management of your onboard charging system.

• High Current: 125A continuous (140A peak) capacity – handles high alternator and charger outputs with ease.
• Automatic Operation: Engages at 13.3V to combine batteries for charging, and disconnects at 12.8V to prevent over-discharge – all automatic with no manual switching.
• Durable Protection: Fully sealed to IP67 and CE certified – impervious to water, salt, and shocks for reliable marine use.
• Low Draw: Ultra-low standby draw (10 mA) – won’t drain your batteries when the engine is off.
• Easy Installation: Compact 69 x 69 mm module with a rugged build – mounts conveniently near batteries or battery switches.

A compact 12-volt fan designed for use on boats or RVs. It clips onto a railing or pole to provide a refreshing breeze during hot days on board. Low power consumption and easy to move as needed.

• 12V DC powered (15 W) – connects to the onboard electrical system (via cigarette plug or direct wiring)
• Convenient clamp attachment to rail, pipe, or edge (up to ~25 mm Ø) – secure mounting with no drilling required
• Fan blade diameter ~15 cm (6") – provides a good airflow in the cabin or cockpit
• Adjustable tilt and swivel – allows you to direct the breeze exactly where you want it
• Durable ABS plastic construction – resistant to vibration and corrosion, built for the marine environment

A middle module for linking multiple rocker switches into one panel. Fits between switches to ensure proper spacing and stability in a row:

• Connects two or more rocker switches side by side in a unified arrangement
• Clips on both sides – snaps to an end panel (SF-BS1) or another middle panel
• Ensures equal spacing and aligned switches with no gaps in the lineup
• Hidden assembly – seams between modules are flush, panel looks continuous
• Sturdy, UV-resistant plastic – maintains shape and grip under vibration and heat

A premium 4-switch marine panel with a stainless steel faceplate for exceptional durability and style. Equipped with blue LED backlights on each switch for night visibility and an option for a momentary horn button in the 4S model. Designed for 12V/24V systems, this panel is water-resistant and built to withstand the harsh saltwater environment – perfect for boats where reliability comes first.

• Four high-quality ON-OFF switches with built-in blue LED indicators to show circuit status
• AISI 316 stainless steel front plate – corrosion-proof, impact-resistant, UV-stable, and adds an elegant look
• 4S model includes 3 standard switches + 1 momentary (spring return) button with red LED – ideal for horn or spotlight control
• Weather-resistant design (IP65+ front) with rubber gaskets and sealed fuse caps for dependable operation in rain and spray
• Each switch circuit protected by an accessible 15A fuse; integrated negative bus bar pre-wired for quick installation

A universal marine battery cut-off switch for disconnecting a single battery – suitable for all boats, RVs, and systems. This robust switch handles 275 A continuous and momentary surges up to 1250 A, making it a reliable choice for isolating your electrical system. Its compact design and removable knob make installation and operation easy.

• Type: Single-circuit ON/OFF disconnect switch for full battery isolation
• Load: 275 A continuous, up to 1250 A momentary (cranking surge)
• Security: Lets you isolate the battery, preventing leaks and unwanted discharge
• Feature: Can double as an anti-theft device – features a removable key/knob (on some models) for extra security
• Mounting: Flexible mounting options (surface or flush); includes necessary nuts and washers for cable connections