Marine paints, varnishes and preparations

UNIVERSAL YACHT PRIMER 1K

• 1-component chlorinated rubber primer
• Recommended above and under the water line
• It can be use on GRP, steel and wood (except TEAK)
• After coating with epoxy primer also applicable on aluminium
• Does not require sanding between coats
• Provides a transition layer between different systems and increases adhesion between the layers
• Could be used as a sealer or barrier coat on antifoulings
• Anti-corrosion properties in layer 390 µm
• Good flow gives a perfect finish

Type: GRP- laminates, wood, stel
Place: Above and below waterline
Function: Grounding, Intercoating
Application: brush, roll, spray gun
Thinning: Thinner for 1 – component primer, varnish, enamel
Theoretical coverage For 1l: ~7 m2 for 140 μm WFT/ 65 μm DFT
Number of coats: 1 – 5
Dust dry 20°C: 1 h
Resistant against rain 20°C: 4 h
Waterproof 20°C: 16 h
Time to launch 20°C: min. 24 h
Elapsed time before applying next coat 20°C: min. 5 h
Color: (matt) grey.

• High-quality 2-component thin coat epoxy primer.
• Great primer for paints and topcoats.
• Provides a transition layer between different systems and increases adhesion between the layers.
• Provides antiosmotic protection in 4 layers (250 um).
• Good flow gives a perfect finish.
• Easy to mix and apply.
• Caution: do not drip onto vertical surfaces.
• Cans include components and room for mixing them.
• Package contains a cup and scale for easy dosing of components.
• Easy to dispense; includes curing box and cork.
• First layer: raw surface, epoxy or polyester filler, epoxy primers, paint cleaned prior.
• Second layer: epoxy primer, polyurethane topcoat, antifouling paints.
• Does not require sanding between coats while maintaining the suggested time interval.

Type: GRP, laminates, wood
Place: Above and below waterline
Function: Grounding, Intercoating, Filling coat, Antiosmotic
Application: brush, roll, spray gun
Thinning: Yes – thinner for epoxy
Theoretical coverage For 1l: 10-11 m2 for 90 μm WFT/ 60 μm DFT
Number of coats: 1 – 5
Pot life 20°C: 2 h
Time between layers without sanding: Min 4h Max 5 days

• COLOR RENOVATION is a product which does not contain silicon and efficiently brings back an original appearance of colours
• Recommended for using on surface made of gelcoat (laminate), polyurethane varnishes, plastic, metal (chrome, brass, stainless steel, aluminum, bronze) and stone (including marble, terracotta, tiles).
• Products deeply penetrates the surface, bringing back the colour and gloss lost as a result of atmospheric conditions (UV rays and rain)
• Using COLOR RENOVATION restores the appearance of mat and chalk paints
• Creates a protective layer on the laminate or paint surface or paints
• COLOR RENOVATION protects steel against corrosion
• Easy in use

Аpplication method: manually - with brush, microfiber cloth.

Packaging: 0.500l.

• Brayt S3 spray is a liquid for all types of paints and varnishes – including HS, 2C, nitro, synthetic fibers and plastics, rubber, gelcoat coatings, glass, mirrors, etc.

• Polishing provides an excellent appearance and protective coating. Removes all traces of abrasives, mist, etc.

• Works as an antistatic, thereby creating additional protection.

• Can be applied manually or mechanically using a soft sponge.

Sea-Line Brayt S3 FINISH CLEANER removes:

- All pollution due to precipitation
- Greasy, difficult to remove stains and dirt
- Residues of damaged protective coatings (including waxes) which must be removed before applying new layer of protective coating
Does not leave streaks.
Does not contain silicone.

Industry- specialistic use
After polishing: wash surfaces with use S3 gives you opportunity to check the quality of the obtained coating, if it is polished well we get a perfect look. It perfectly removes all traces of abrasives, haze, etc.
At the final stage: because of fast cleaning dirt from surface which is a result from the production processes and easy in use, working time necessary for preparing elements before shipping is much shorter.

Package: 500ml

Sea-Line Brayt S5 it is quick and easy in use product on base wax, recommended for every smooth and gloss surfaces (laminate, varnish and glass). After use S5 QUICK WAX we get color depth and gloss. Has an excellent hydrophobic and maintenance properties. Does not leave streaks on the plastics and rubber surfaces.
Sea-Line S5 Quick Wax is a product which is recommended after polishing surfaces with Sea-Line polishing compounds.
Wax can be used on surfaces exposed on sunlight.
Does not leave streaks.
Wash the surface before use Sea-Line® S5 QUICK WAX:
Sea-Line® C1 BOTTOM CLEANER (shell and fouling remover)
Sea-Line® C2 CONCENTRATE CLEANER
Sea-Line® S3 SHAMPOO WITH WAX

Basic information:

Type: laminates (gelcoat), glass varnished surfaces, plexi, polycarbonate
Function: UV protection; Reduces the adhesion of dirt; hydrofobic
Texture: liquid

Colour: white (after use-transparent)

Packaging: 500ml

Application: hand (atomizer in set)

Use:
Before applying the wax, make sure that surface is clean and dry.
Spray S5 QUICK WAX on the surface. Apply only such an amount of product which can be spread on the surfaces before its dry.
Spread wax on the surface using microfiber cloth.
Wipe surfaces with a new microfiber cloth. To increase gloss we can use polishing machine with soft heads.

Cleaning:
For daily maintenance we should use products which will gonna be safe for wax layer: Sea-Line® C3 SHAMPOO WITH WAX.

Sea-Line® S4 PROTECT WAX formula does not leave streaks on the surface and does not damage the components made of plastic.
This modern wax protects the surface against UV rays and  settling of dirt, at the same time giving it a perfect and very high gloss.
It is recommended to use Sea-Line ® S4 PROTECT WAX especially a surface which, after the polishing process requires additional security and protection against UV rays.
It was created by Sea-Line ® S4 PROTECT WAX protective coating remains on the surface for a long period of time.

Reduces the adhesion of dirt. Suitable for gelcoat and painted surfaces.

Application - the surface must be clean and dry. Apply in a thin layer and rub with a soft microfiber cloth.

Package: 250 ml

• Sea-Line S1 preffesional Marine polishing paste is a very effective polishing paste. Does not contain silicone.
• Recommended for polishing gelcoat surfaces, manufacturing composites, polyurethane paints and topcoats. S1 quickly removes scratches and defects after sanding, guaranteeing an ideal surface.
• Includes high-quality polishing minerals, which ensure a rapid removal of defects.
• Achieves a high luster by using a one-step process.
• Does not cause excessive heating of the surface and is easy to clean.
• Function: eliminates defects;removes chalking and surface discoloration; high gloss; protection
• Type of famage: sanding P1200 and up
• Application: hand or machine – rotation max 2000
• Recommended applicator: lamb wool, hard sponge
• Colour: light green
• Package:0.500 kg

S1 SOFT CUT & GLOSS – Polishing paste thanks to its versatility can be used in industrial as well as DIY use. This is a perfect product for charter companies or private boat owners which have to restore gloss on different type of surfaces. The paste does not contain wax and silicone fillers.

Category: production, care and maintenance
Surface: gelcoat in light and dark colors, polyurethane paints and varnishes, plexi, polycarbonates,
Polishing pads: sheep wool, lamb wool, polishing sponges
Polishing: manual, rotary machine, orbital machine
Advantages: multiplicity of use, no polishing defects remains on the surface, easy to use, effectiveness
Function: removing defects from the surface, gloss restoring
Consistency: liquid – cream paste
UV resistance level: very low.

S2 EXTRA SHINE HOLOGRAM REMOVER

• Sea-Line® S2 finishing compound is universal for all types of finishing coatings.
• Eliminates defects after polishing and provides a perfect mirror finish.
• High quality minerals provide immaculate polishing, a mirror finish without holograms, and the optimal proportion of solids and a binder keeps your work area clean and makes the residual product easy to remove.
• Does not contain silicone.
• For surface: gelcoat, topcoat, composites, poliuretan paints.
• Function: polishing, high gloss, protection, recommended for dark colors
• Type of famage: scratches on dark colors
• Application: hand or machine
• Recommended applicator: lamb wool; hard or soft sponge
• Package: 0,500 kg
• Color: light blue

• Sea-Line® S05 polishing compound is a one-stage compound with a high cutting force which guarantees quick removal of defects and grinding scratches from a surface after treatment with sandpaper of gradation from P800.
• Sea-Line® S05 polishing compound is primarily designed for the companies which produce goods in which the outer layer is gelcoat or forms made from utility gelcoat and an industrial topcoat with a high toughness degree.
• Using S05 polishing compound allows for shortening the labour time thanks to a high cutting force while obtaining appropriate gloss on the surface without the necessity of using other kinds of polishing compounds.
• Application methods: rotation polishing machine, lambswool,  hard sponge
• Texture: paste.
• No silicone.

Package: 1 kg

Sea-Line® S1 PREMIUM guarantees obtaining a very high gloss on the surface in one-stage polishing process.

S1 Premium Compound is designed for surfaces difficult to polish, such as varnishes (also polyurethane ones) plexi or  polycarbonates and laminates. At the same time the used polishing grain gives a very high gloss and efficiently removes defects and grinding scratches after using sandpaper of gradation from P800 (in case of dark colours after using sandpaper of gradation

The compound is provided in the form of liquid, it allows for a precise dosing of appropriate amount, depending on the type of the surface that is being polished.

APPLICATION METHODS: Rotation machine, hand.

Basic informations:
Surface: gelcoat, polyurethane paints and varnishes, plexi, polycarbonate
Function: removing defects from the surface; gloss restoring
Consistency: liquid – cream paste.