Eyelets, Fittings, and Hooks

The Ø5 mm plastic snap stud base is part of a marine canvas fastener system (snap buttons for boat covers). This piece acts as the male stud mounted on a hard surface (hull, fiberglass, frame) to which the canvas attaches via a snap. Made of impact-resistant plastic, it will not corrode and comes in white or black to blend with your boat’s trim.

• Function: Male snap stud (base) for press-stud fasteners – secures covers, curtains, cushions by snapping together with the female part
• Installation: Mount with a flat-head screw (Ø4.8–5.5 mm); 5 mm inner diameter accommodates standard screws flush
• Material: Tough engineering plastic (UV-stabilized) – non-corrosive and marine-grade for saltwater use
• Colors: White or black – choose to match your boat or canvas color, with no rust stains over time
• Advantages: Lightweight, no sharp edges; securely holds the snap under vibration and high winds, won’t scratch surfaces

The Ø5 mm plastic washer is a small yet important accessory for installing boat covers and hardware. It spreads the load of a screw head over a larger area, protecting fabric or surfaces from chafing and tear-out. Made of durable plastic, this washer will not corrode and fits screws with ~5 mm shank diameter (e.g. 4.8–5.5 mm). Available in white and black.

• Size: 5 mm inner diameter (fits standard #8–#10 screws); outer diameter ~12 mm to effectively distribute pressure
• Material: Tough UV-resistant plastic – withstands outdoor conditions without cracking or degrading
• Purpose: Acts as a spacer and reinforcing washer when fastening canvas, tarpaulins, covers, etc., with screws
• Usage: Place under the screw head (especially with countersunk/flat heads) to ensure even clamping and prevent direct metal-to-fabric contact
• Advantage: Lightweight, non-metallic washer – no rust or metal reaction; maintains a clean look and increases the strength of the assembly

The Ø17 mm snap fastener kit provides a top and bottom piece to secure boat covers, canvas, and cushions. Made of brass with a chrome-plated finish, these snaps combine corrosion resistance with an attractive shine. The 17 mm cap diameter ensures a firm grip and easy snap-on/snap-off operation. They install by crimping or pressing onto the fabric and are compatible with standard bases/studs (e.g. plastic or metal pins).

• Contents: Female part (cap) + male part (stud) for one complete snap; forms a full fastening set
• Material: Solid brass with electroplated chrome finish – 100% corrosion-proof in marine conditions
• Size: 17 mm head diameter (standard large size for marine canvas) – easy to snap even with gloves on
• Strength: Holds canvas securely; spring-lock design prevents accidental unfastening under tension or vibration
• Application: Ideal for bimini tops, boat covers, spray curtains, enclosures, and any marine canvas that needs reliable fastening to the boat

These grommet kits are designed to reinforce holes in canvas, tarps, and boat covers. Made of high-quality brass with a chrome finish, the grommets resist corrosion and give your cover a professional look. They come in multiple inner diameters – 8 mm, 12 mm, 15 mm, 16 mm, or 19 mm – to suit various needs (from small rope holes to large cord openings). Each kit includes an eyelet and a matching washer for secure attachment to the fabric.

• Material: Chrome-plated brass – will not rust, retains shine, and withstands moisture and UV
• Sizes: Ø8, Ø12, Ø15, Ø16, Ø19 mm inner hole (choose based on rope/shock cord thickness or fitting size)
• Reinforcement: Protects the fabric hole from tearing and wear; allows you to tension covers tightly with rope or bungee
• Installation: Easy crimp or press-on installation – two-piece set (ring and washer) that clinch together with a proper tool
• Application: For lacing covers to the boat with ropes, bungees, or hooks; suitable for biminis, awnings, boat covers, tents, etc.

The INOX screw cover is a cap-and-washer set that enables secure attachment of covers or canvas using a screw while providing a clean, finished look. Made entirely of stainless steel, this cover will not corrode and withstands harsh weather. The wide base (Ø44 mm) distributes pressure on the fabric, and the top cap (Ø42 mm) conceals the screw head, giving a smooth, finished appearance with no sharp edges.

• Set Includes: Top cap Ø42 mm + bottom washer Ø44 mm – together form a broad clamping surface
• Material: Polished marine-grade stainless steel – resists corrosion, staining, and UV, with long-lasting shine
• Function: Allows you to permanently secure canvas to a solid surface (wood, fiberglass) with a screw, without the fabric tearing or slipping
• Design: Flat cap that either screws or snaps onto the base after the screw is installed – hides the screw and prevents snagging
• Use Cases: Ideal for permanently mounted covers (console, seat covers) or canvas structures – provides a tight hold and a professional appearance

Marine-grade stainless steel snap button (Ø13 mm cap) for canvas covers, biminis, and enclosures. Provides a secure fasteningsolution between fabric and boat, with zero rust or corrosion even in saltwater conditions. Compatible with standard marine press-stud systems.

• Crafted from high-quality stainless steel – will not rust or corrode in marine environments
• Standard 13 mm cap diameter – fits most common marine canvas snap fastener systems
• Ensures a firm grip to attach boat covers, tarpaulins, and tent canvas to decks or frames
• Easy to install using a snap setter tool or press; creates a professional, flush finish
• Strong holding power – maintains tight closure even with repeated use and exposure

Floating elastic shock cord with two plastic balls on the ends – a handy tie-down for quickly securing covers, canopies, and gear. It provides stretchy yet secure fastening without the need for knots or metal hooks, and it won’t scratch your boat’s surface.

• Available in two lengths: 40 cm and 60 cm (unstretched) to suit various applications
• Easy to use: wrap around an object or through grommets and loop one ball through the cord – instant tension with no complicated knots
• Sturdy bungee cord construction with UV-resistant outer sheath – stands up to weather and repeated use
• Plastic balls on both ends serve as grip and locking points; they won’t mar or damage paint or fabric
• Cord floats on water, so it’s easily retrieved if dropped overboard

This bridge-style pad eye is made from high-quality AISI 316 stainless steel, providing excellent corrosion resistance and a long service life. It features a U-shaped loop (the “bridge”) with two mounting holes (one at each end of the U) for secure installation on surfaces. Use it as a strong tie-down point or attachment anchor on your boat or dock. It’s durable, easy to install, and ideal for all kinds of marine and outdoor projects where a reliable lashing point is needed.

• Material: Heavy-duty INOX AISI 316 stainless steel (polished, rustproof)
• Strength: Robust one-piece U-bolt design – handles substantial loads when properly through-bolted
• Installation: Two-hole mount (“bridge” shape) for flush attachment to decks, bulkheads, docks, or walls (fasteners not included)
• Uses: Great for securing straps, bimini top bands, cargo nets, boat covers, rigging lines; also suitable for architectural and DIY projects requiring an easy-to-mount eye bracket

A heavy-duty bridge-style pad eye with reinforced design, made from AISI 316 stainless steel. This model features a thicker bar and sturdier construction, allowing it to handle higher loads compared to standard pad eyes. It’s the same convenient U-bracket shape with two mounting holes, but in a more robust form factor. Ideal for demanding applications on larger boats or structural projects where extra strength is required. Provides a reliable anchor point that is easy to install and extremely corrosion resistant.

• Material: AISI 316 stainless steel (extra thick build for enhanced strength)
• Design: Reinforced U-strap with two mounting holes (heavier gauge steel) – can withstand heavy pulls and sustained loads
• Use Cases: Recommended for larger yachts, industrial marine applications, or high-load tie-downs (e.g., securing jet skis on deck, attaching heavy blocks, overhead lifting points for equipment within rated capacity). Also excellent for architectural uses needing a stronger eye plate.

Provide a stable support for your boat cover with this lightweight yet sturdy telescopic pole made of anodized aluminum. Its adjustable design lets you set the perfect height to prevent water from pooling on the cover, keeping your boat dry and the cover taut.

• Adjustable Height – available in two models with ranges 60–100 cm or 90–150 cm, accommodating the needs of different boats and cover sizes.
• Anodized Aluminum – lightweight, rustproof material that withstands saltwater and corrosion, ensuring a long service life.
• Wide Base & Cap Tip – a stable base prevents sliding on your boat floor; the top cap fits beneath the cover, distributing pressure evenly.
• Prevents Water Pockets – props your cover up like a tent, so rainwater and snow run off instead of pooling and sagging the cover.