Добре дошли в нашия магазин
Добре дошли в нашия магазин

Сравни
0 Количка
Всички категории

Импелер за Mercury/Mariner 40–60 к.с. 4-тактов двигател

Код:
52.378.00

Характеристики

  • Марка двигател:
    Mercury / Mariner / Mercruiser
  • Брой лопатки:
    6 лопатки
  • Вътрешен диаметър ø:
    19.25 мм
  • Външен диаметър ø:
    78.2 мм
  • Височина:
    25.15 мм
  • Материал на импелер:
    Неопрен

 

Резервен импелер за 4-тактови извънбордови двигатели Mercury/Mariner 40, 50, 60 к.с. (включително модели BigFoot/Command Thrust). Поддържа правилно охлаждане на малки до средни мотори, осигурявайки им плавна работа и дълъг живот.

  • Съвместим с Mercury/Mariner 40, 50, 60 к.с. 4-тактови (≈1998 г. и по-нови, карбюраторни и EFI, вкл. BigFoot версии)
  • Замества импелер за водна помпа Mercury №47-19453T
  • 6-лопатков импелер (Ø 78 мм) осигурява достатъчен поток вода за ефективно охлаждане
  • Прецизно излят за лесен монтаж и надеждно уплътнение в корпуса на помпата
  • Поддържа двигателя хладен както при бавно тролене, така и при движение с висока скорост
Тип Монтаж / Профил:
€2531 4950 лв.
Добави в желани

В наличност

Бърза поръчка без регистрация

Бърза поръчка без регистрация

Само попълнете 4 полета
Ние ще се свържем с вас в рамките на работния ден.

This impeller is specifically designed for Mercury/Mariner four-stroke outboards in the 40–60 HP range. These 3-cylinder engines – including the popular BigFoot (Command Thrust) models – rely on a robust impeller to pump cooling water through the motor. Our replacement impeller matches Mercury’s specifications (part #47-19453T) to ensure your outboard stays within safe temperature limits at idle and at full throttle.

Whether you’re trolling at low speeds or cruising at high RPM, this 6-blade impeller maintains steady water circulation to protect your engine from overheating. Its neoprene rubber vanes are durable yet flexible, creating a tight seal within the pump housing for efficient operation. This impeller is a must-have spare for owners of 40–60 HP Mercury 4-strokes, allowing quick maintenance and peace of mind on fishing trips and family outings.

  • Engine Applications: Ideal for Mercury/Mariner 40, 50, 60 HP 4-stroke outboards (both carbureted and EFI versions, ~1998 onward). Includes compatibility with 50HP BigFoot and 60HP FormulaRace or Command Thrust variants that use the same pump.
  • Boat Use: Perfect for small boats (4–5 m) such as aluminum fishing boats, inflatables/RIBs, and tenders powered by these engines. Maintains proper cooling during prolonged idling (trolling) as well as quick accelerations.
  • Restore Performance: Replacing a worn impeller with this OEM-equivalent unit restores factory cooling performance, preventing overheating on hot days or when running the engine hard. A cool engine runs more efficiently and lasts longer.
  • Installation: Designed for easy DIY installation with basic tools. The precise molding ensures it slides into the water pump housing correctly and forms a reliable seal, saving you time during impeller changes.
  • Be Prepared: It’s wise to carry a spare impeller on board, especially for remote fishing spots or extended trips. If you notice a weak cooling stream (tell-tale), it’s time to replace the impeller to avoid engine damage.
  • Марка двигател:
    Mercury / Mariner / Mercruiser
  • Брой лопатки:
    6 лопатки
  • Вътрешен диаметър ø:
    19.25 мм
  • Външен диаметър ø:
    78.2 мм
  • Височина:
    25.15 мм
  • Материал на импелер:
    Неопрен

Най-продавани